Effect of Organic Additive Composition on Isostatic Thermocompression Behavior of Alumina Tapes

유기물 조성에 따른 알루미나 테이프의 열간 가압 거동

  • 이명현 (한국과학기술연구원 재료연구부) ;
  • 박일석 (한국과학기술연구원 재료연구부) ;
  • 김대준 (한국과학기술연구원 재료연구부) ;
  • 이득용 (대림대학 금속재료공학과)
  • Published : 2000.08.01

Abstract

Alumina tapes, having various ratios of alumina to alumina+binder+plasticizer (a/(a+o)) and binder to binder+plasticizer(b/(b+p)), were prepared by the tape casting method. The tapes were thermocompressed varying the thermocompression parameters such as temperature, pressure, and duration time. Among the parameters, the pressure was the most influential to the tape packing density. The packing density varied in two different ways depending on the a/(a+o) ratio. For the tapes having low a/(a+o) ratio, a saturation density was reached by applying very a low pressure of 1 MPa. For tapes with high a/(a+o), on the contrary, the saturation density was obtained at a relatively high pressure. These different responses to the pressure are attributed to the fact that the rearrangement of alumina particles by the pressure becomes easy as an organic content in the tapes is high.

Keywords

References

  1. Ceram. Eng. Sci. Proc. v.13 no.9-10 Strength-Flaw Elimination Assessment in Tape-cast Ceramic Laminates R. Ham-Su;D. S. Wilkinson
  2. J. Ceram. Soc. Bull. v.58 no.5 Densification of PZT Cast Tape by Pressing J. V. Biggers;T. R. Shrout;W. A. Schulze
  3. 요업학회지 v.31 no.6 분말의 함량 및 적층공정이 Tape Casting 법으로 제조된 Ni-Zn Ferrite의 물성에 미치는 영향 이창호;김병호;김왕섭;김경용
  4. J. Eur. Ceram. Soc. v.10 no.3 Processing of Ceramic-matrix/platelet Composites by Tape Casting and Lamination T. Claussen;N. Claussen
  5. J. Mater. Sci. Lett. v.13 New Process for Fabricating Interconnect Plate for a Planar Solid Oxide Fuel Cell N. M. Sammes;R. Ratnaraj
  6. J. Am. Ceram. Soc. v.77 no.8 Processing of Tape-Cast Laminates Prepared from Fine Alumina/Zirconia Powders K. P. Plucknett;C. H. Careres;C. Hughes;D. S. Wilkinson
  7. J. Am. Ceram. Soc. v.82 no.11 Mechanical Properties of Tape Cast Alumina-Glass Dental Composites D.-J. Kim;M.-H. Lee;C.-E. Kim
  8. in Treatise on Materials Science and Technology, Ceramic Fabrication Process v.9 Doctor-Blade Process J. C. Williams;F. Y. Wang(ed.)
  9. Am. Ceram. Soc. Bull. v.53 no.5 D. J. Shanefield;R. E. Mistler
  10. J. Am. Ceram. Soc. v.79 no.12 Rheological Property and Stress Development during Drying of Tape-Cast Ceramic Layers J. A. Lewis;K. A. Blackman;A. L. Ogden
  11. Mat. Res. Soc. Symp. Proc. v.287 Tape Casing of Silicon Nitride Y. W. Kim;J. G. Lee
  12. Am. Ceram. Soc. Bull. v.71 no.10 The Role of Slip Additives in Tape-Casting Technology: Part Ⅰ-Solvents and Dispersants R. Moreno
  13. Principals of Ceramics Processing, 2nd Edition. Flocculants, Binders, and Bonds J. S. Reed
  14. Adv. Ceram. Mater. v.3 no.4 Casting Behavior and Tensile Strength of Cast BaTiO₃Tape A. Karas;T. Kumagai;W. R. Cannon
  15. Am. Ceram. Soc. Bull. v.64 no.5 Viscosity of Tape-Casting Slips L. Braun;J. R. Morris, Jr.;W. R. Cannon
  16. Ceramic Processing Before Firing Tape Casting of Ceramics R. E. Mistler;D. J. Shanefield;R. B. Runk;G. Y. Onoda(ed.);L. L. Hench(ed.)
  17. 요업재료의 과학과 기술 v.8 no.3 Alumina 기판 양산용 Tape Casting 기술 김영민;홍양기
  18. Solid state Technology v.5 Properties of Multilayer Ceramic Green Sheets R. A. Gardner;R. W. Nufer
  19. High Tech Ceramics T. Ueyama;N. Kanebo;P. Vincenzini(ed.)
  20. J. Eur. Ceram. Soc. v.19 no.16 Mechanical and Lamination Properties of Alumina Green Tape Obtained by Aqueous Tape Casting F. Doreau;G. Tari;M. Guedes;T. Chartier;C. Pagnoux;J. M. F. Ferreira