Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Multi-stage Analysis of Elliptic Cup Drawing Processes with the Large Aspect Ratio by an Explicit Elasto-Plastic Finite Element Method

외연적 유한요소법을 이용한 세장비가 큰 타원형 컵 성형공정의 다단계 해석

  • 김세호 (한국과학기술원 기계공학과) ;
  • 김승호 (한국과학기술원 기계공학과) ;
  • 허훈 (한국과학기술원 기계공학과)
  • Published : 2000.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Finite element analysis is carried out for simulation of the multi-stage elliptic cup drawing process with the large aspect ratio. The analysis incorporates with shell elements for an elasto-plastic finite element method with the explicit time integration scheme. For the simulation, LS-DYNA3D is utilized for its wide capability of solving forming problems. The simulation result shows that the non-uniform drawing ratio at the elliptic cross section ad the small shoulder radius cause failure such as tearing and wrinkling. The result suggests the guideline to modify the tool shape for prevention of the failure during the drawing process.

Keywords

References

  1. LG 생산기술 no.2월 디프 드로잉 - 소형2차전지 사각케이스의 성형 허훈
  2. Process. Inst. Mech. Eng. v.1B An Experimental Investigation of Redrawing of Cylindrical Cups Chung, S. Y.;Swift, H. W.
  3. J. Jpn. Soc. Technol. Plast. v.25 Fracture Mechansim and Fracture Control in Deep Drawing with Hydraulic Counter Pressure ;Studies on Hydraulic Counter Pressure Forming I Nakamur, K.;Nakagawa, T.
  4. Proc. Japanese Conf. Tech. Plast. A Research on Double Stretch-Drawing Process Gotoh, M.;Kim, Y. S.;Yamashita, Y.
  5. Proc. Japanese Conf. Tech. Plast. Can Forming of Ti-Sheets by Stretch-Drawing Process, and Adaptability of Spray-coated Dies Sotoh, J.;Gotoh, M.;Maeda, Y.
  6. Proc. Japanese Conf. Tech. Plast. Mechanical Joining of Seams at Wall of Cup Produced by using Developed Blank Yamaguchi, K;Takakura, N.;Shirakawa, S.;Yamaguchi, T.
  7. 第10回金屬プレス加工技術硏究會 ステンレス綱板のプレス成形技術に關する最新の話題 渡部豊臣
  8. J. JSTP v.38 Thinning in the Cylindrical Cup Wall Thickness by Ironing with Redrawing Shimizu, K.;Wada, T.
  9. J. Mater. Process. Technol. v.47 Consideration of the Re-drawing of Sheet Metals based on Finite Element Simulation Parsa, M. H.;Yamaguchi, K.;Takakura, N.;Imatani, S.
  10. J. Mater. Process. Technol. v.89 An Elasto-plastic Finite-element Analysis of the Metal Sheet Redrawing Process Huang, Y. M.;Li, C. L.
  11. 한국소성가공학회지 v.8 no.1 박판성형 성형공정 해석시스템 개발 정완진;조진우
  12. 한국소성가공학회지 v.6 no.4 유한요소 역해석을 이용한 축대칭 다단계 박판성형에서의 공정변수설계에 관한 연구 조천수;이충호;허훈
  13. LS-DYNA3D Users manual Hallquist, J. O.
  14. Comput. Methods Appl. Mech. Engrg. v.96 Advances in One-point Quadrature Shell Elements Belytschko, T.;Wong, B. L.;Chiang, H. Y.
  15. Int. J. Numer. Meth. Engng. v.17 A Uniform Strain Hexahedron and Quadrilateral with Orthogonal Hourglass Control Flanagan, D. P.;Belytschko, T.