Measurements of Mixture Strength Using Spark Plug

스파크 플러그를 이용한 혼합기 농도 측정

  • Published : 2000.07.01

Abstract

Ion current in an S.I engine cylinder is measured with the spark plug as a probe. The peak values are confirmed to show a fair correlation with local air-fuel ration and engine speed which implies that the ion current measured at the spark plug may provide a signal for the local mixture strength which is the key parameter in precise fuel control for future engines especially of gasoline direct-injected lean burn engines.

Keywords

References

  1. 춘계학술대회논문집 v.1 광역산소 센서를 이용한 실린더별 공연비 제어 김혜순;박진일;고상근
  2. SAE paper 970856 Local Air-Fuel Ratio Measurements Using the Spark Plug as an lonization Sensor R. Reinmann;A. Saitzkoff;Fabian Mauss
  3. J.B.Heywood Internal Combustion Engine Fundamentals
  4. 인하대 대학원 석사학위논문 스파크플러그를 이용한 실린더내 Misfire센서 개발에 관한 연구 최동천
  5. 자동차공학회지 v.19 no.5 엔진 실화 감지 관련 기술 최상민;정영고;김형현
  6. SAE paper 860635 Knock Detection by Means of the Spark Plug N. Collings;S. Dinsdale;D. Eade
  7. SAE paper 950003 Engine Misfire Detection by Ionization Current Monitoring A. Lee;J. S. Pyko
  8. SAE paper 950004 Ion-Gap Sense in Misfire Dtection Knock and Engine Control J. Auzins;J. Johansson;J. Nytomt
  9. JSAE paper 963314 Development of New Combustion Control System by Ion Current M. Asano;K. Kajitani;T. Kuma;M. Takeuchi;Y. Fukumura
  10. SAE paper 930462 Flamd Ion Density Measurement Using Spark Plug Voltage Analysis S. Miyata;Y. Ito;Y. Shimasaki
  11. SAE paper 930461 Spark Plug Voltage Analysis for Monitoring Combustion in an internal Combustion Engine Y. Shimasaki;M. Kanehiro;S. Baba;S. Maruyama;T. Hisaki;S. Miyata