Improvement with Speed Response of Moving Magnet Type LDM

가동자석형 LDM의 속도응답특성 개선

  • 맹인재 (동국대학교 전기공학과) ;
  • 백수현 (동국대학교 전기전자공학부) ;
  • 김용 (동국대학교 전기전자공학부) ;
  • 윤신용 (동국대학교 산업기술연구원)
  • Published : 2000.09.01

Abstract

In this paper, to improve the mechanical response of the Moving Magnet Type LDM, the design of the LDM was optimized to achieve a large force to volume ratio without reduction the force. The model of the LDM and its optimization procedure were developed on the initial assumption that the magnetic circuit is linear. To analyze the magnetic flux distribution throughout the volume of the LDM and the slider back iron, a 2D finite element analysis of the LDM was performed.

본 논문에서는 2개의 전기자 구조로된 대형 voice coil용 가동자석형 LDM을 대상으로, LDM의 추력 대 체적비를 고려하며 가동자의 칠섬익 체적올 추력의 감소없이 최적화함므로서 LDM의 응답 특성을 향상시킬 수 있는 방법에 대해 살펴보았다. 자기회로는 선형이라는 가정하에 LDM 해석을 수행하여 LDM의 가동자를 설계하였으며, 유한요소해석 소프트웨어인 Maxwell-2D에 의해서 철심의 포화를 고려한 가동자 철섬의 두께를 결정하였다. 이러한 결과에 대한 타당성은 기준형 LDM과 가동자 철심의 형상이 개선된 개선형 LDM의 2대를 설계, 제작한 실험 결과에 의해서 입증하였다.

Keywords