Journal of environmental and Sanitary engineering (환경위생공학)

Korean Society for Environmental Sanitary Engineers (대한환경위생공학회)
권호 표지

Analysis of Thermal Degradation Process if Commercial Rubber for Environmentally Benign Process

범용고무의 환경친화적 처리를 위한 열분해 공정 해석

  • Published : 2000.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The kinetic analysis was carried out for commercial rubbers such as NR, IR, BR, SBR 1500, and SBR 1700. Kinetic analysis for the commercial rubbers was performed using the thermogravimetric method, with which the activation energies of NR obtained by Kissinger, Friedman, and Ozawa's method were 195.0, 198.3 and 186.3kJ/mol, whereas that of SBR 1500 were 246.4, 247.5 and 254.8kJ/mol, respectively. It was shown that the yield of pyrolytic oil was generally increased with final temperature increasing, yet slightly decreased or increased over $700^{\circ}C$. Considering the effect of heating rate, it was found that the yield of pyrolytic oil was not consistent for each sample. The number average molecular weight of SBR 1500 was in the range of 740~2486. The calorific value of SBR 1500 was 39~40kJ/g, which were made comparative study of the conventional fuel such as kerosene, diesel, light fuel, and heavy fuel. Therefore it was essential that the selection of the suitable kinetic model and the mathematical solution because of the difference in parameters obtained from each method. It was proposed that the range of $600~700^{\circ}C$ in final temperature and high heating rate due to short run time. It was suggested that the pyrolytic oil be available to use to the fuel.

Keywords

References

  1. Plastics Recycling : Products and Processes Ehrig, R. J.;Ehrig, R. J.(ed.)
  2. HWAHAK KONGHAK v.30 no.2 Pyrolytic Propensity of Plastics Mixture in a Thermogravimetric Analyzer Kim, Y.S.
  3. Applied Pyrolysis Handbook Wampler, T.P.;Wampler, T.P. (ed.)
  4. Ind. Eng. Chem. Res. v.36 Kinetics of the Low Temperature Pyrolysis of Polyethylene, Polypropylene, and Polystyrene Modeling, Experimental Determination, and Comparison with Literature Models and Data Westerhout, R.W.J.;Waanders, J.;Kuipers, J.A.M.;van Swaaij, W.P.M.
  5. J. of the Institute Energy v.68 The Pyrolysis of Automotive Tyre Waste Williams, P.T.;Besler, S.;Taylor, D.T.;Bottrill, R.P.
  6. J. Korea Solid Wastes Engineering Society v.16 no.3 Thermal Degradation Behavior of cis-Polyisoprene and Styrene-Butadiene Rubber Kim, H.J.;Kim, S.D.;Lee, S.B.;Hong, I.K.
  7. Anal. Chem. v.29 no.11 Reaction Kinetics in Differential Thermal Analysis Kissinger, H.E.
  8. J. Polym. Sci. v.6 Kinetics of Thermal Degradation of Char-Forming Flastics from Thermogravimetry. Application to A Phenolic Plastic Friedman, H.L.
  9. Bull. Chem. Soc. v.38 no.11 New Method of Analyzing Thermogravimetric Data Ozawa, T.A.
  10. Pilot Plant Demonstration of Used Tyres Vacuum Pyrolysis(Pyrolysis and Gasification) Roy, C.;Unsworth, J.;Ferrero, G.L.(ed.);Maniatis, K.(ed.);Buekens, A.(ed.);Bridgwater, A.V.(ed.)
  11. Fuel v.74 no.11 Benallal, B.;Pakdel, H.;Chabot, S.;Roy, C.
  12. Conservation & Recycling v.6 no.3 Semi-Active and Aromatics Produced by Pyrolysis of Scrap Tires Lucchesi, A.;Maschio, G.
  13. ACS Symposium Series 130 Pyrolysis of Plastic Waste and Scrap Tyres Using A Fluidised Bed Process, in Thermal Conversion of Solid Wastes and Biomass Kaminsky, W.;Sinn, H.;Jones, J.L.(ed.);Radding, S.B.(ed.)
  14. Pyrolysis and Gasification Production of Benzoles and Active Carbon from Waste Rubber and Plastic Materials by Means of Pyrolysis with Simultaneous Post-Cracking Cypres, R;Bettens, B.;Ferrero, G. L.(ed.);Maniatis, K.(ed.);Buekens, A.(ed.);Bridgwater, A. V.(ed.)
  15. Destructive Distillation of Scrap Tyres, US Dept.of Interior Bureau of Mines Report of Investigations Wolfson, D.E.;Beckman, J.A.;Walters, J. G.;Bennett, D. J