Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Frictional Characteristics of Wire Electric Discharge Machined STDll Surface

STD11 와이어 방전가공면의 마찰특성

  • 김영욱 (홍익대학교 대학원 기계공학과) ;
  • 조성산 (홍익대학교 기계공학과)
  • Published : 2000.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Frictional behavior of wire electric discharge machined surfaces of spheroidized annealed STDll steel was investigated. The surfaces were produced with a various series of finish cuts where pulse energy was reduced with increase in the number of finish cuts. Roughness and micro-hardness of the surfaces were also measured. It is observed that the increase in the number of finish cuts produces the surface exhibiting lower frictional resistance followed by higher resistance after considerable wear. Effects of finish cuts on the friction characteristics are discussed with the aid of roughness and micro-hardness of the surfaces.

Keywords

References

  1. Advanced Methods of Machining McGeough, J. A.
  2. Annals of the CIRP v.20 Review of Surface Integrity of Machined Components Field, M.;Kahles, J. F.
  3. Annals of the CIRP v.20 Review of Surface Integrity of Machined Components Field, M.;Kahles, J. F.
  4. Annals of the CIRP v.29 Determination of the Mechanical and Thermal Influences on Machined Surfaces by Microhardness and Residual Stress Analysis Tonshoff, H. K.;Brinksmeier, E.;
  5. Proc. 13th NAMRC Surface Damage and Shock Waves in EDM Rajurkar, K. P.
  6. JSPE v.54 no.6 The Electrolytic Corrosion on Wire-EDM'd Surface Masui, K.;Sone, T.
  7. JSPE v.57 no.1 The Microhardness on Wire-EDM'd Surface Masui, K.;Sone, T.;Demizu, K.
  8. JSPE v.57 no.1 Study on Residual Stress of Wire-EDM'd Surface(1st Report):Relationship between Machining Condition and Stress Distribution Ogata, I.;Mukoyama, Y.;Hihara, M.
  9. Annals of the CIRP v.44 Study of the White Layer of a Surface Machined by Die-Sinking Electro-Discharage Machining Kruth, J.-P.;Stevens, L.;Froyen, L.;Lauwers, B
  10. Journal of Materials Processing Technology v.56 Experimental Investigation on Migration of Material During EDM of Die Steel(T215Cr12) Soni, J. S.;Chakraverti, G.
  11. Journal of Materials Processing Technology v.84 Influence of EDM Pulse Energy on the Surface Integrity of Matensitic Steels Rebelo, J. C.;Dias, A. M.;Kremer, D.;Lebrun, J. C.
  12. Wear v.63 The Effect of Surface Texture on Friction Mechanisms Kuora, M. M.