Synthesis and Physical Properties of Waterborne Polyurethane Microgels

수분산성 폴리우레탄 마이크로겔의 합성과 물성

  • Kim, Kong-Soo (Dept. of Chemical Engineering, Chungbuk National University) ;
  • Kim, Tae-Kyung (Dept. of Chemical Engineering, Chungbuk National University) ;
  • Oh, Geul-Jung (Dept. of Chemical Engineering, Chungbuk National University) ;
  • Kim, Sang-Ki (Dept. of Chemical Engineering, Chungbuk National University)
  • 김공수 (충북대학교 화학공학부) ;
  • 김태경 (충북대학교 화학공학부) ;
  • 오중걸 (충북대학교 화학공학부) ;
  • 김상기 (충북대학교 화학공학부)
  • Published : 2000.12.31

Abstract

Waterborne polyurethane(PU) microgel dispersions were synthesized with different mole ratio of polytetramethylene glycol(PTMG) to dimethylol propionic acid(DMPA). Particle size distribution, thermal and mechanical properties of the PU microgels were investigated. Particle size of the microgels was distributed in the range of $98{\sim}$680{\mu}m$ and decreased with increasing the mole ratio of DMPA and 1,2,6-hexanetriol. Glass transition temperature and melting temperature of the microgels were in the range of $-79.7 {\sim}-78.1^{\circ}C$, $22{\sim}24^{\circ}C$ respectively. Tensile strength and elongation of the PU microgel films were maximum in the case of 60/40 mole ratio of PTMG/DMPA.

폴리테트라메틸렌글리콜(PTMG) 및 디메틸올프로피온산(DMPA)의 몰비를 변화시키며 수분산성 폴리우레탄 마이크로겔 분산체를 합성하였다. 합성한 폴리우레탄 마이크로겔의 입도분포, 열적 및 기계적특성을 실험하였다. 마이크로겔의 입자크기는 $98{\sim}$680{\mu}m 범위에 분포되어 있으며, DMPA와 1,2,6-hexanetriol의 몰비가 증가함에 따라 감소하였다. 마이크로겔의 유리전이온도 및 융점은 각각 $-79.7 {\sim}-78.1^{\circ}C$, $22{\sim}24^{\circ}C$ 범위였으며, PTMG/DMPA의 몰비가 60/40인 폴리우레탄 마이크로겔 필름의 인장강도 및 신장률이 최대값을 나타내었다.

Keywords