Design of Traveling-Wave Type CPW Electrodes in a Mach-Zehnder Ti:$LiNbO_3$ Optical Modulator with a Grooved $SiO_2$ thin Film

Grooved $SiO_2$ 박막을 갖는 Mach-Zehnder Ti:$LiNbO_3$ 광변조기의 진행파형 CPW 전극설계

  • 한영탁 (서울市立大學院 電子工學科) ;
  • 김창민 (서울市立大學院 電子工學科) ;
  • 윤형도 (電子部品硏究員 素子通信部品硏究센터) ;
  • 임상규 (西江大學校 電子工學科) ;
  • 안철 (西江大學校 電子工學科) ;
  • 구경환 (電子部品硏究員 素子通信部品硏究센터)
  • Published : 2000.11.01

Abstract

A Mach-Zehnder type $Ti:LiNbO_3$ optical modulator with a grooved $SiO_2$ buffer layer, was evaluated in terms of an electrode structure. The finite element method was performed to find out the optinum design parameters of electrodes. characteristic impedance ($Z_o$), MW effective index ($N_{eff}$) and attenuation constant ($a_o$)of fabricated traveling-wave electrodes were measured and compared with those obtained by the simulation expectation. For an optical modulator with 11${\mu}m$thick electrodes and a grooved $SiO_2$ buffer layer, the 3dB bandwidth based on the RF measurement results turned out to be 18GHz.

Goodved $SiO_2$ 박막을 갖는 Mach-Zehnder(M-Z)형태의 $Ti:LiNbO_3$ 진행파 광변조기의 전극구조를 변화시켜가며 유한요소법에 의한 해석을 수행하였다. 최적의 설계치를 추출하였으며, 제작된 전극에 대하여 특성임피던스($Z_o$), 마이크로파 유효굴절률($N_{eff}$), 감쇠정수($a_o$)를 측정하여 그 결과를 이론치와 비교하였다. 전극두께가 11${\mu}m$이고, $SiO_2$ 완중박막을 식각한 전극에 대하여, RF 측정결과로부터 계산된 3dB 변조대역폭은 18GHz로 나타났다.

Keywords

References

  1. D.W. Dolfi et al., 50GHz velocity-matched, boad wavelength $LiNbO_3$ modulator with multimode active section, Integrated Photonics Research, Pd2, 1992
  2. R. A. Becker, Traveling-wave electro-optic modulator with maximum bandwidth-length product, Appl. Phys, Lett., 45(11), 1168-1170(1984) https://doi.org/10.1063/1.95091
  3. M. Rangaraj, T. Hosoi, and M. Kondo, A wide-band $Ti:LiNbO_3$ optical modulator with a conventional coplanar waveguide type electrode, IEEE Photon. Technol. Lett., vol. 4, no. 9, pp. 1020-1022, 1992 https://doi.org/10.1109/68.157135
  4. Xiang Zhang and Tanroku Miyoshi, Optimum design of coplanar waveguide for $LiNbO_3$ optical modulator, IEEE Trans. Microwave Thoery Tech., vol. 43, no. 3, pp. 523-528, 1995 https://doi.org/10.1109/22.372096
  5. Kwok Wah Hui, Kim Seng Chiang, Boyu Wu, and Z. H. Zhang, Electrode optimization for high-speed traveling-wave integrated optic modulators, J. Lightwave Technol., vol. 16, no. 2, pp. 232-238, 1998 https://doi.org/10.1109/50.661015
  6. Shih-Jung Chang, Ching-Ling Tsai, Yih-bin Lin, Ju-Feng Liu, and Way-Seen Wang, Improved electrooptic modulator with ridge structure in X-cut $LiNbO_3$, J. Lightwave Technol., vol. 17, no. 5, pp. 843-847, 1999 https://doi.org/10.1109/50.762902
  7. Kazuto Noguchi Osamu Mitomi, and Hiroshi Miyazawa, Millimeter-wave Ti : $LiNbO_3$ optical modulators, J. Lightwave Technol., vol. 16, no. 4, pp. 615-619, 1998
  8. W. K. Burns, M. M. Howerton, R P. Moeller, A. S. Greenblatt, and R.W. McElhanon, Broad-band reflection traveling-wave $LiNbO_3$ modulator, IEEE Photon. Technol. Lett., vol. 10, no. 6, pp. 805-806, 1998 https://doi.org/10.1109/68.681490
  9. Kazuto Noguchi, Osamu Mitomi, Hiroshi Miyazawa, and Shunji Seki, A broadband $Ti:LiNbO_3$ optical modulator with a ridge structure, J. Lightwave Technol., vol. 13, no. 6 , pp. 1164-1168, 1995 https://doi.org/10.1109/50.390234
  10. Kazuhiko Atsuki and Eikichi Yamashita, Transmission line aspects of the design of broad-band electrooptic traveling-wave modulators, J. Lightwave Technol., vol. LT-5, no. 3, pp. 316-319, 1987
  11. Osamu Mitomi, Kazuto Noguchi, and Hiroshi Miyazawa, Design of ultra-braod-band $LiNbO_3$ optical modulators with ridge structure. IEEE Trans. Mocrowave Theory Tech., vol. 43, no. 9, pp, 2203-2207, 1995 https://doi.org/10.1109/22.414565
  12. Jong Chang Yi, Sun Ho Kim, and Sang Sam Choi, Finite-Element Method for the Impedance Analysis of Traveling-Wave Modulatros, J. Lightwave Technol., vol. 8, no. 6, pp. 817-822, 1990 https://doi.org/10.1109/50.54497
  13. Tadasi Sueta, and Masayukiizutsu, Integrated Optic Devices for Microwave Applications, IEEE Trans. Microwave Thoery Tech, vol. 38, no. 5, pp. 477-481, 1990 https://doi.org/10.1109/22.54914
  14. Kenji Kawano, High-Speed Shielded Velocity-Matched $Ti:LiNbO_3$ Optical Modulator, IEEE J. Quantum Electron., vol. 29, no. 9, pp. 2466-2475, 1993 https://doi.org/10.1109/3.247704
  15. Hiroshi Miyamoto, Hitoshi Ohta, Kazuhiko Tabuse, Hideto Iwaoka, and Yoshihide Miyagawa, A broad-band traveling-wave $Ti:LiNbO_3$ optical phase modulator, Jpn. J Appl. Phys., vol. 30, no. 3A, pp. L383-L385, 1991 https://doi.org/10.1143/JJAP.30.L383
  16. 정석원, 김창민, 진행파 광변조기의 테이퍼 영역 전극 설계:SOR기법, 한국광학회지, 제7권, 제2호, pp. 77-86, 1996
  17. K. C. Gupta et al., Microstrip lines and Slotlines, Artech House, pp, 257-301, 1979
  18. 김창민, 한상필, '$Ti:LiNbO_3$ 진행파 광변조기의 FEM 전극해석 및 대역폭 예측,' 대한전자공학회논문지, 제32권, A편, 제2호, pp. 96-110, 1995
  19. J. N. Reddy, An Introduction to the Finite Element Method, McGraw Hill-Book Company, 1985
  20. Jianming Jin, The Finite Element Method in Electromagnetics, John Wiley & Sons, Inc, pp. 72-135, 1993
  21. S. Uehara, Calibration of Optical Modulator Frequency Response with Application to Signal Level Control, Appl. Opt., vol. 17, pp. 68-71, 1981
  22. R. A. Becker, Broad-Band Guided-Wave Electrooptic Modulators, IEEE J. Quantum Electron, vol. QE-20, no. 7, pp. 723-727, 1984. https://doi.org/10.1109/JQE.1984.1072457