Flow Direction Characteristics in the Vicinity of the Spark Plug in an S. I. Engine

  • Han, Sung-Bin (Department of Mechanical Engineering, Induk Institute of Technology) ;
  • Chang, Yong-Hoon (Department of Mechanical Engineering, Induk Institute of Technology) ;
  • Chung, Yon-Jong (Department of Automotive Engineering, Taegu Future College)
  • 발행 : 2000.08.01

초록

The flame speed may be decomposed into the burning speed and the flame transport speed. The flame transport speed is affected considerably by the flow direction, variation rate of flow direction, and flow speed in the combustion chamber. Especially, the flow direction and the variation rate of flow direction at the spark plug location during the ignition period have an important effect on the ignition process and the early flame propagation process. We measured the flow direction component and the variation rate of flow direction with a hot wire probe at the spark plug location. It was shown that the representative flow direction of ignition period is the right-vertical direction of crank shaft and it was used to investigate the variation rate of flow direction.

키워드

참고문헌

  1. Anderson, R. L., 1986, 'In-Cylinder Measurement of Combustion Characteristics Using Ionization Sensors,' SAE Paper 860485, pp. 3.295-3.306
  2. Arcomumanics, C., Bae, C. H., and Hu, Z, 1994, 'Flow and Combustion in a Four-Valve. Spark-Ignition Optical Engine,' SAE paper 940475
  3. Brehob, D. D. and Newman, C. E., 1992, 'Monte Carlo Simulation of Cycle by Cycle Variability,' SAE Paper 922165
  4. Han, S. B., Chung, Y. J., and Lee, S. Y., 1995, 'The Analysis of Turbulent Flow by Various Factors in the Engine Combustion Chamber,' Proceeding of International Conference on Power Engineering, Shanghai, China, May 22-26, pp. 1167-1172
  5. Han, S. B., Chung, Y. J., and Lee, S. Y., 1995, 'Effect of Engine Variables on the Turbulent Flow of a Spark Ignition Engine,' KSME International Journal, Vol. 9, No. 4, pp. 492-501
  6. Han, S. B., and Chung, Y. J., 1998, 'A Study on the Effect of Operating Conditions for the Stability at Idle,' KSME International Journal, Vol. 12, No. 4, pp. 694-700
  7. Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGRAW - HILL International Editions
  8. Hinze, P. C., 1997, 'Cycle-to-Cycle Combustion Variations in a Spark-Ignition Engine Operating at Idle,' MIT Ph. D. Thesis
  9. Johansson, B., 1993, 'Influence of the Velocity Near the Spark Plug on Early Flame Development,' SAE Paper 930481
  10. Keck, J. C., 1985, 'Laminar Burning Speed Measurements of Indolene-Air-Diluent Mixture at High Pressure and Temperatures,' SAE Paper 850047
  11. Ozdor, N., Dulger, M. and Sher, E., 1994, 'Cyclic Variability in Spark Ignition Engines A Literature Survey,' SAE Paper 940987
  12. Shen, H., Hinze, P. C. and Heywood, J. B., 1994, 'A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations,' SAE Paper 942049
  13. Shen, H., Hinze, P. C. and Heywood, J. B., 1996, 'A Study of Cycle-to-Cycle Variations in SI Engines Using a Modified Quasi-Dimensional Model,' SAE Paper 961187
  14. Wahiduzzam, S., Morel, T., and Sheard, S., 1993, 'Comparison of Measured and Predicted Combustion Characteristics of a Four- Valve S. I. Engine,' SAE Paper 930613
  15. Witze, P.O., 1986, 'Direct Measurement of the Turbulent Burning Velocity in a Homogeneous Charge Engine,' SAE Paper 861531, pp. 6.540-6.551
  16. Xu, Y., Dong, Y., and Tsao, K. C., 1991, 'Application of Turbulent Combustion Model to a Spark Ignited L-Head Engine,' SAE Paper 910056