부산지역 PM2.5와 PM10의 농도 특성

Characteristics of PM2.5 and PM10 Concentration in Pusan Area

  • 김상렬 (경성대학교 건설.환경공학부) ;
  • 정장표 (경성대학교 건설.환경공학부) ;
  • 이승묵 (이화여자대학교 환경공학과)
  • Kim, Sang-Youl (Dept. of Civil & Environmental Engineering, Kyungsung University) ;
  • Cheong, Jang-Pyo (Dept. of Civil & Environmental Engineering, Kyungsung University) ;
  • Yi, Seung-Muk (Dept. of Environmental Science and Engineering, Ewha Womans University)
  • 투고 : 2000.01.14
  • 심사 : 2000.03.31
  • 발행 : 2000.06.30

초록

여러 가지 대기오염물질을 규제대상으로 지정하여 대기중으로 방출되는 대기오염물질에 대한 적절한 처리와 방지를 통하여 대기질을 개선하는 작업이 필요하다. 특히 도시지역의 경우 이들 오염물질 중 시정의 악화, 인체보건학상 급 만성 장애를 초래하며, 재산상의 피해를 주는 분진 에 대해 최근 관심이 모아지고 있다. 이러한 분진의 농도 중가에 따른 피해를 저감시키기 위해서 는, 먼지의 농도 특성 자료에 근거한 적절한 통제전략을 수립할 필요가 있다. 이러한 배경에서 본 연구는 부산지역의 도시분진 오염도에 대한 적절한 관리를 위해 부산지역의 대기중 $PM_{2.5}$의 질량농도 및 수용성 음이온성분($Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$)의 농도 특성을 $PM_{10}$의 경우와 대비하여 비교 평가하였다. 시료채취기간은 1999년 5월부터 1999년 11월까지이며, 각 38회의 $PM_{2.5}$$PM_{10}$의 시료를 채취하여, 그 질량농도와 수용성 음이온성분 ($Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$) 의 농도 특성을 분석하였다. $PM_{2.5}$의 전체기간동안 평균농도는 $35.016{\mu}g/m^3$으로 산정되었으며, $PM_{10}$ 평균농도 ($50.293{\mu}g/m^3$)에 대한 $PM_{2.5}$의 질량농도비 평균은 0.692로 산정되었다. $PM_{2.5}$ 중 수용성 음이온성분의 전체평균농도는 각각 $1.581(Cl^-)$, $3.690(NO_3{^-})$ 그리고 $12.825(SO_4{^{2-}}){\mu}g/m^3$으로 나타났으며, $PM_{10}$은 각각 $2.471(Cl^-)$, $5.819(NO_3{^-})$ 그리고 $14.414(SO_4{^{2-}}){\mu}g/m^3$으로 나타났다. 각 성분들간의 상관분석을 시행한 결과, $PM_{2.5}$$PM_{10}$ 질량농도의 상관성은 0.945로 상당히 높은 상관관계를 나타내었다. $PM_{2.5}$ 질량농도와 각 성분들간에는 $Cl^-$(0.025), $NO_3{^-}$(0.788), 그리고 $PM_{10}$ 질량농도와는 $Cl^-$(-0.019), $NO_3{^-}$(0.806), 그리고 $SO_4{^{2-}}$)(0.535)의 상관성을 나타내었다.

It is necessary to improve the ambient air quality through the proper treatment and control of pollutants by designating air pollutants to regulatory ones. Especially, human took a concern for particulate matters which raised visibility reduction, public health effects and injury of property for urban areas. In order to reduce the effect of particulate matters, we need to establish proper control strategies based on the concentration characteristics of particulate matters. In this study. to evaluate the characteristics of $PM_{2.5}$ and $PM_{10}$. thirty-eight samples of $PM_{2.5}$ and $PM_{10}$ were collected at Nam-Gu sampling site where continuous air monitoring system has been operated, from May, 1999 to November, 1999, and their concentrations for the mass and anion components($Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$) were analyzed. The important conclusions obtained in this study were as followings. Total average mass concentrations of $PM_{2.5}$ and $PM_{10}$ were 35.016 and $50.293{\mu}g/m^3$ respectively. and $PM_{2.5}/PM_{10}$ ratio was calculated 0.692. Total average concentrations of anion components in $PM_{2.5}$ were $1.581(Cl^-)$, $3.690(NO_3{^-})$ and $12.825(SO_4{^{2-}}){\mu}g/m^3$ and those in $PM_{10}$ were $2.471(Cl^-)$, $5.819(NO_3{^-})$ and $14.414(SO_4{^{2-}}){\mu}g/m^3$ respectively. From the correlations analysis. the correlation coefficient between mass concentration of $PM_{2.5}$ and $PM_{10}$ was calculated as 0.945. The correlation coefficients between $PM_{2.5}$ and anion components were analyzed as $Cl^-$(0.025), $NO_3{^-}$(0.788) and $SO_4{^{2-}}$(0.500) respectively, and the correlation coefficients between $PM_{10}$ and anion components were analyzed as $Cl^-$(-0.019), $NO_3{^-}$(0.806) and $SO_4{^{2-}}$)(0.535) respectively.

키워드