Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

가공면의 상태 변화 측정에 관한 연구

  • Published : 2001.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes a new method for measuring the changes in specific surface asperities arising from processes such as finishing, coating, wear and corrosion. In repetitive measurements, relocation device gives the same position and orientation so that specific profile can be obtained. A low-cost relocation device is designed and its performance is assessed. The error in relocation process is compensated by statistic compensation algorithm. And, a removing process of cusp by grinding is observed by the proposed method.

Keywords

References

  1. Tadao Tsukada, Kazuyuki Sasajima, 'A three-dimensional measuring technique for surface asperities,' Wear, 71, pp. 1-14, 1981 https://doi.org/10.1016/0043-1648(81)90135-6
  2. Tohru Kanada,Tatsusei Kubota and Atsushi Suzuki, 'A three-dimensional surface profile measuring system with a specimen-levelling device,' Meas. Sci. Technol., 2, pp. 191-197, 1991 https://doi.org/10.1088/0957-0233/2/3/001
  3. 최경용, '공기압 시스템을 이용한 경면 다듬질 자동화 장치 개발에 관한 연구,' 한양대학교 산업경영대학원, pp. 1-9, 1997
  4. 이두찬, 정해도, 안중환, 三好隆志, '자동금형연마의 최적조건선정 전문가시스템 개발,' 한국정밀공학회지, 제 14 권, 제 10 호, pp.58-67, 1997
  5. D. G. Chetwynd, F. A. McKee and C. H. Wride, 'The measurement of wear damage,' Proceeding of The Institution of mechanical engineering,' Vol. 201, pp. 251-258, 1982
  6. P. A. Engel and D. B. Mills, 'Study of Surface Topography in Impcat Wear,' Wear, 75, pp. 423-442, 1982 https://doi.org/10.1016/0043-1648(82)90162-4
  7. A. Bengtsson and A. Ronnberg, 'The Absolute Measurement of Running-In,' Wear, 109, pp. 329-342, 1986 https://doi.org/10.1016/0043-1648(86)90276-0
  8. Sherrington and E. H. Smith, 'Design and performance assessment of a Kelvin clamp for use in relocation analysis of surface topography,' PRECISION ENGINEERING, Vol. 15, No. 2, April, pp. 77-85, 1993 https://doi.org/10.1016/0141-6359(93)90341-7
  9. P. J. Sullivan and N. Luo, 'The Use of Digital Techniques for Error Correction in Surface Roughness Measurement,' Surface Topography, 2, pp. 143-157, 1989
  10. Nahmgyoo CHO,Tadao TSUKADA, and Masaaki TAKAHASHI, 'Measurement of Surface Roughness with Small Waviness by Contact Stylus Instrument Correcting Specimen Orientation,' Int. J. Japan Soc. Prec. Eng., Vol. 29, No. 1, March, pp. 74-79, 1993