Development of the Automatic Design System for Hydraulic Gate

취수 갑문 설계 자동화 개발

  • Lee, Hoo-Gwang (Technology Research Center, Doosan Heavy Industries and Construction Corporation) ;
  • Choi, Jae-Seung (Technology Research Center, Doosan Heavy Industries and Construction Corporation) ;
  • Hwang, Suk-Hwan (Technology Research Center, Doosan Heavy Industries and Construction Corporation)
  • 이후광 (두산중공업(주) 기술연구원) ;
  • 최재승 (두산중공업(주) 기술연구원) ;
  • 황석환 (두산중공업(주) 기술연구원)
  • Published : 2001.06.01

Abstract

An automatic design system for a hydraulic gate has been developed to cut down the time for the design calculation and to optimize its design. It is oriented to the radial gate which is the simplest, most reliable, least expensive and most widely used hydraulic gate. This system is composed of data input, strength computation and result display modules with databases of the properties of components and materials. In this development, the existing intricate design procedure has been changed to the straightforward procedure without assumption of weight. With this code, the design time of the radial gate could be reduced below one thirtieth in comparison with manual work and the optimum design could be accomplished easily.

Keywords

References

  1. Shi-Wu Yan, 'Dynamic Characteristics of Tainter Gates and Their Optimization', Journal of Structural Engineering, Vol. 117, No.11, pp.3261-3273, 1991
  2. D. Golliard, S. Chevalier, 'An Innovative Solution to a Safety Problem at Montsalvens Dam,' Issue 2, pp.63-65, 1998
  3. 권영두, 권순범, 구남서, 진승보, '회전식 수문의 중량 최소화에 대한 지지점 위치의 최적 설계,' 대한기계학회 추계학술대회 논문집 A, pp.492-497, 2000
  4. Technical Standards for Gates and Penstocks, Hydraulic Gate and Penstock Association Japan, 1976
  5. 강재설비설계기준, 산업기지개발공사 발전부, 1987
  6. 水門鐵管技術基潗 第 4 改正版, 日本 水門鐵管協會, 1998
  7. 이성태, 윤태진, 원영수, 박주호, 신제구조역학, 이우출판사, 1988
  8. Mastering Microsoft Visual Basic 6 Development, Microsoft, 1998