Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Shape Optimization for Buckling and Postbuckling Behavior of Stiffened Laminated Composite Panels

보강된 복합적층 패널의 좌굴 및 좌굴후 거동의 형상 최적설계에 관한 연구

  • Lee, Gwang-Rok (Dept.of Mechanical Engineering, Graduate School of Sungkyunkwan University) ;
  • Jeong, Gi-Hyeon (Dept.of Mechanical Engineering, Graduate School of Sungkyunkwan University) ;
  • Heo, Seong-Pil (Dept.of Mechanical Engineering, Graduate School of Sungkyunkwan University) ;
  • Yang, Won-Ho (Dept.of Mechanical Engineering, Sungkyunkwan University) ;
  • Jo, Myeong-Rae
  • 이광록 (성균관대학교 대학원 기계공학과) ;
  • 정기현 (성균관대학교 대학원 기계공학과) ;
  • 허성필 (성균관대학교 대학원 기계공학과) ;
  • 양원호 (성균관대학교 기계공학부) ;
  • 조명래
  • Published : 2001.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a shape optimization of stiffener was conducted to increase buckling load or failure load in each case with a different design value and a different objective function for stiffened laminated composite panel of I-type under compression loading. Regarding each of buckling load or failure load as objective function, optimum design was carried out. In respect of optimum design, the effects of relative length of web and cab of stiffener on buckling load or failure load of postbuckling were investigated.

Keywords

References

  1. Haftka R. T. and Walsh J. L., 1990, 'Stacking-sequence Optimization for Buckling of Laminated Plates by Integer Programming,' AIAA JOURNAL, Vol. 30, pp. 814-819
  2. Riche R. L. and Haftka R. T., 1993, 'Optimization of Laminated Stacking Sequence for Buckling Load Maximization by Genetic by genetic Algorithm,' AIAA JOURNAL, Vol. 31
  3. 이인철, 1995, '보강된 복합적층패널의 좌굴 및 좌굴후 거동,' KAIST 항공공학과 박사학위 논문, pp. 103-114
  4. Elishakoff and LI Y. W. and Starnes Jr J. H., 1995, 'Buckling Mode Localization in Elastic Plates due to Misplacement in The Stiffener Location,' Chaos, Solutions & Fractals., Vol. 5, No. 8, pp. 1517-1531
  5. Narita Y. and Leissa A. W., 1990, 'Buckling Studies for Simply Supported Symmetrically Laminated Rectangular Plates,' Int. J. Mech. Sci., Vol. 32, pp. 909-924 https://doi.org/10.1016/0020-7403(90)90063-O
  6. Starnes J. H, Knight N. F., and Rouse M., 1982, 'Postbuckling Behavior of Selected- curved Panels Loaded in Compression,' Experimental Mechanics, Vol. 22, pp. 231-236 https://doi.org/10.1007/BF02326363
  7. Knight N. F., and Starnes J. H., 1988, 'Postbuckling Behavior of Selected Curved Stiffened Graphite-Epoxy Panels Loaded in Compression,' AIAA JOURNAL, Vol. 26, No.3, March, pp. 344-352
  8. Dickson J. N., Cole R. T., and Wang J. T. S., 1980, 'Design of stiffened composite panels in the Post-Buckling Range,' Fibrous Composites in Structural Design, Plenum Press, New York, pp. 313-327
  9. Ronald F. Gibson, 1994, Principles of Composite Material Mechanics, Mcgraw-Hill, Inc., pp. 99-130