Journal of Mechanical Science and Technology

  • 제15권1호
  • /
  • Pages.108-116
  • /
  • 2001
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Investigation of In-Cylinder Flow Patterns in 4 Valve S. I. Engine by Using Single-Frame Particle Tracking Velocimetry

  • Lee, Ki-hyung (Department of Mechanical Engineering, Hanyang Unversity) ;
  • Lee, Chang-sik (Department of Mechanical Engineering, Hanyang Unversity) ;
  • Chon, Mun-soo (Technical Center, Daewoo Motor Co, Ltd.)
  • 발행 : 2001.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The in-cylinder flow field of gasoline engine comprises unsteady compressible turbulent flows caused by the intake port, combustion chamber geometry. Thus, the quantitative analysis of the in-cylinder flow characteristics plays an important role in the improvement of engine performances and the reduction of exhaust emission. In order to obtain the quantitative analysis of the in-cylinder gas flows for a gasoline engine, the single-frame particle tracking velocimetry was developed, which is designed to measure 2-dimensional gas flow field. In this paper, influences of the swirl and tumble intensifying valves on the in-cylinder flow characteristics under the various intake flow conditions were investigated by using this PTV method. Based on the results of experiment, the generation process of swirl and tumble flow in a cylinder during intake stroke was clarified. Its effect on the tumble ratio at the end of compression stroke was also investigated.

키워드

참고문헌

  1. Arcoumanis, C. Hu, Z., Vafidis, C. and Whitelaw, J. H. 1990, 'Tumbling Motion -:A Mechanism For Turbulence Enhancement In Spark-Ignition Engines,' SAE Paper 900060
  2. Choi, Su-Jin, Jeon, Chung-Hwan Chang, Young-Jun, 1999, 'Lean Combustion Characteristics in a S. I Engine with SCV by Operating Conditins,' KSME International Journal Vol. 12, No. 3
  3. Khalighi, B. and Huebler, M. S. 1995, 'A Transient Water Analogue of a Dual Intake-Value Engine for Intake Flow Visualization and Full-Field Velocity Measurements,' SAE Paper 950201
  4. Lee, J. H. and Farrell, P. V., 1993, 'Intake Value Measurements of an IC Engine Using Particle Image Velocimetry,' SAE Paper 930480
  5. Lee, Ki-Huyng, Lee, Chang-Sik and Joo, Young-Cheol, 1999, 'Measurement of Velocity and Turbulence SCale Near the Spark Plug by using a Two-Color PIV Method,' JSME International Journal, Series B, Vol. 42, No. 4, pp. 674-682
  6. Neuβer, H. J., Spiegel, L. and Ganser, J., 1995, 'Particle Tracking Velocimetry;A Powerful Tool to Shape the In-Cylinder Flow of Modern n Multi-Value Engine Concepts,' SAE Paper 950102
  7. Newman, A. W., Girgis, N. S., Benjamin, S. F. and Baker, P., 1995, Barrel Swirl Behavior in a Four-Value Engine with Pentroof Chamber,' SAE Paper 950730
  8. Reuss, David L., 2000, 'Cyclic Variability of Large-Scale Turbulent Structures in Directed and Undirected IC Engine Flows,' SAE Papper 2000-01-0246
  9. Shuliang, Liu, Yufeng, Li and Lu Ming, 2000, 'Prediction of Tumble Speed in the Cylinder of the 4-Value Spark Ignition Engines,' SAE Paper 2000-01-0247
  10. Tabata, M., Kataoka, M., Fujimoto, M. and Noh, Y., 1995, 'In-Cylinder Fuel Distribution, Flow Field, and Combustion Characteristics of a Mixture Injected SI Engine,' SAE Paper 950104