Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지

A Development of the Recoil Rod Pull Force Measurement System Using the Load Cell with Sleeve

슬리브관을 갖는 로드셀을 이용한 주퇴봉 당김력 계측시스템 개발

  • Published : 2001.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a development of the recoil rod pull force measurement system suing the load cell with a sleeve normally available in the recoil system test. The commercial load cell cannot be used in the test of recoil system floating the breach contact point freely in the air. The load cell is designed and manufactured to meet the recoil system test condition. Theoretical analysis and experimental results show that the accuracy of the developed measurement system is within $\pm$0.5%. We notice that the measurement technique proposed in this paper is accurate and useful in the recoil rod pull force measurement of the recoil system.

Keywords

References

  1. 최주호, '주퇴복좌운동 측정기법에 관한연구,' 국방과학연구소, TAEC-514-89003, pp. 1-50, 1990
  2. Wu, Charles T., 'Transverse sensitivity of bonded strain gages,' Experimental Mechanic 2, pp. 338-344, 1962 https://doi.org/10.1007/BF02326139
  3. Harry N. Norton, 'Sensor and analyzer hand-book,' Prentice-Hall, Inc., pp. 120-130, 1993
  4. Hetenyi, M., 'Handbook of experimental stress analysis,' John Wiley & Sons, Inc., New York, 1950
  5. Lee, G. H., 'An introduction to experimental stress analysis,' John Willey & Sons, Inc., New York, 1950
  6. Roark, R. J., 'Formulas for stress and strain, 4th ED.,' McGraw Hill New York, 1965
  7. Ernest O. Doebelin, 'Measurement system application and design,' McGraw-Hill, pp. 211-246, pp. 367-371, pp. 695-701, 1983
  8. APG(Aberdeen Proving Ground), 'Strain meas urement-unidirectional,' U.S.Army TECOM(Test and Evaluation Command) Test Operations Procedure(TOP) 3-1-006, pp. 1-7, pp. A1-E, 1983
  9. Transinstruments User's Guide, 'PSC 8015-1 DC-Differential amplifier,' IMO Industries GmbH, pp. 1-17, 1995
  10. Micro Measurements Tech. Notes 'Wheatstone bridge nonlinearity', MM. Inc., TN 139-2, 1983
  11. Meier, J. H., 'On the transverse-strain sensitivity of foil gages', Experimental Mechanics 1, pp. 39-40, 1961 https://doi.org/10.1007/BF02324128
  12. Micro Measurements Tech Notes, 'Transverse sensitivity errors,' MM. Inc., TN 137-2, 1983
  13. Barry N. Toylor and Chris E. Kuyatt, 'Guidelines for evaluating and expressing the uncertainty of NIST measurement results,' NIST Technical Note 1297, pp. 1-25, 1992