Characteristics Improvement of Plate-Type Ozonizer using Inverse-Polarity Voltage and Accumulative Method

역극성 전압인가와 적층법을 이용한 판형오존발생기의 특성개선

  • 이상근 (영남대 대학원 전기공학과) ;
  • 박용권 (영남대 대학원 전기공학과) ;
  • 이동욱 (자원리사이클링 연구소) ;
  • 전병준 (영남대 대학원 전기공학과) ;
  • 송현직 (구미1대 전기과) ;
  • 이광식 (영남대 전기전자공학부)
  • Published : 2001.12.01

Abstract

In this Paper, the ozonizer is fabricated by piling plate-type electrodes up to minimize and reduce install space. Hereby ozone generation characteristics of piled plate-type ozonizer were investigated. Inverse-polarity voltage was generated by H.V neon transformer. And 2 H.V neon transformers were used to supply high voltage each 9 electrodes of plate-type ozonizer. According to the experiments, ozone concentration, generation and yield were proportionally increased tilth increasing the number of electrode. And the maximum increase effects of 246%, 245%, and 33% were obtained when the number of electrode were increased from 3 up to 9.

Keywords

References

  1. 李 廣植, 李 東仁, '氣體放電에 의한 오존생성과 그 應用', 大韓電氣學會 放電 . 高電壓(硏), 學術發表會論文集, pp.32-35, 1992
  2. Sang-Keun Lee, Hyun-Jig Song, Byung-Joon Chun, 'The Characteristics of Ozone Generation in Superposed Discharge type Ozonizer', Proceedings of 1998 Korea- Japan joint symposium on ED and HVE, pp.99-102, 1998
  3. James A. Robinson, 'A New Type of Ozone Generator Using Taylor Cones on Water Surfaces', IEEE Transactions on Industry Application, Vol. 34, No. 6, 1998 https://doi.org/10.1109/28.738979
  4. 田畑則一, '放電によるオゾン發生法に關する考察', T.IEE Japan, Vol.117-A, No.12, pp.1200-1206, 1997
  5. 服部 仁, 'オゾン生成にける放電の重疊效果', T.IEE Japan, Vol.117-A, No.12, pp.41-46, 1992
  6. Vincenzo Gagliardo 'Discharges in Very-short Air Gaps in Plane-parallel Electrodes and under ac Voltage', IEEE Transactions on Dielectrics and Electrical Insulation, Vol.1, No.6, December 1994 https://doi.org/10.1109/94.368648
  7. B.Eliasson, 'Ozone science and engineering', Vol.13, pp.365-373, 1991
  8. Moo Been Chang, 'Experimental Study on Ozone Synthesis via Dielectric Barrier Discharges', Ozone science and engineering, Vol. 19, pp.241-254, 1997