Evaluation of Mechanical Properties in Bi-2223 Composite Superconducting Tapes

Bi-2223산화물 복합 초전도 테이프의 기계적 특성 평가

  • Published : 2001.11.01

Abstract

For the practical use of a superconducting wire to magnet application, it is important to assess the Young modulus and other mechanical properties of HTS tapes. In order to establish a test method of mechanical properties for oxide composite superconductors. tensile tests of Bi-2223 multi- filamentary tapes were carried out at room temperature, as an activity of the International round robin test proposed by the committee of VAMAS/TWA 16-Subrgroup. The tapes consisting of mutli-filamentary showed a three stage tensile behavior. At the initial stage of the stress-streain curve. The elastic deformation existed in a quite nattrow strain region. But the plastic deformation was observed in a wide strain region due to the platic flow of the Ag alloy matrix. The results of RRT were also reported and discussed.

Keywords

References

  1. 한국초전도 저온공학회논문지 v.3 no.1 Bi-2212 초전도 테이프에서 임계전류의 응력/변령률 특성에 미치는 외부강화의 영향 신형섭;K. Katagiri
  2. Influence of Stress/Strain on Transport Critical Current Measurement for HTSC, in Advances in Superconductivity XI H. S. Shin;K. Katagiri;N. Koshizuka;S. Tajima(ed.)
  3. IEEE Trans. v.5 Compressive and Tensile Axial Strain Reduced Critical Currents in Bi-2212 Conductors B. ten Haken;H. ten Kate
  4. Proc. of Int. Workshop on Mechano-Electrical Property of Composite Superconductors K. Osamura
  5. Physica C no.357 Mechanical Properties of Power-in-Tube Processed Mono-and Multi-Filamentary Bi-2223 tapes K. Osamura;M. Sugano