한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제18권9호
  • /
  • Pages.140-146
  • /
  • 2001
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

유니버설 조인트 베어링용 시일의 성능평가를 위한 유한요소해석

Finite Element Analysis for Performance Evaluation of the Seal in a Universal Joint Bearing

  • 김태완 (부산대학교 정밀기계공학과 대학원) ;
  • 문석만 (부산대학교 정밀기계공학과 대학원) ;
  • 구영필 (부경대학교 기계공학과) ;
  • 조용주 (부산대학교 기계공학과)
  • Kim, Tae-Wan (Dept.of Precision Mechanical Engineering, Graduate School of Busan National University) ;
  • Moon, Suk-Man (Dept.of Precision Mechanical Engineering, Graduate School of Busan National University) ;
  • Koo, Young-Pil (Dept.of Mechanical Engineering, Pukyong National University) ;
  • Cho, Yong-Joo (Dept.of Mechanical Engineering, Busan National University)
  • 발행 : 2001.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Seals in a universal joint bearing are important components reinforcing lubrication performance by holding lubricant and preventing infiltration of dust, moisture, etc.. There is a great difference in seal performance according to seal shape and bonding position. Therefore, in this study, as for both the lip type seal and the O-ring type seal, FE analysis is conducted using Mooned-Rivlin Model. The results show that O-ring type seal does not have any effect of misalignment angle compared with lib type seal, which is more profitable.

키워드

참고문헌

  1. 'ASM Handbook, Vol. 18 Friction, Lubrication and Wear Technology,' The Materials Information Society, pp. 546-552, 1992
  2. 日本 潤滑學會, 潤滑 Handbook, 養賢堂, pp.510-513, 1987
  3. Stakenborg, M. J. L., 'On the Sealing and Lubrication Mechanism of Lib Seals,' Ph.D. Thesis, 1988
  4. Kim, C. K., 'Finite Element Analysis of Contact Behaviors of Rubber Lip Seals,' J. of KSTLE, Vol. 10, No.4, pp. 82-88, 1993
  5. Green, I. and English, C., 'Analysis of Elastomeric O-ring Seals in Compression Using the Finite Element Method, J. of Tribology. Trans., Vol. 35, pp. 83-88, 1992 https://doi.org/10.1080/10402009208982093
  6. Lindley, E., 'Compression Characteristics of Laterally unstrained Rubber O-Ring,' J. of IRI, Vol. 1, pp. 202-213, 1967
  7. Aklonis, J. J. and MacKnight, W. J., Introduction to Polymer Viscoelasticity, Clarendon Press, Oxord, pp. 123-126, 1982
  8. Eschmann, Hasbargen and Weigand, Ball and Roller Bearings Theory, Design, and Application, Second Edition, John Wiley & Sons, pp. 260-261, 1985
  9. Tedric A. Harris, Rollong Bearing Analysis, Second Edition, John Wiley & Sons, pp. 214-216 1984