한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

고압 회로차단기의 비등속 회전 캠의 최적설계

Optimal Design of a Variable-Speed Cam for Power Circuit Breaker

  • 김준형 (한국과학기술원 기계공학과 대학원) ;
  • 안길영 (한국과학기술원 기계공학과 대학원) ;
  • 김수현 (한국과학기술원 기계공학과) ;
  • 곽윤근 (한국과학기술원 기계공학과)
  • Kim, Jun-Hyeong (Dept. of Mechanical Engineering, Graduate School of Korea Advanced Institute of Science and Technology) ;
  • An, Gil-Yeong (Dept. of Mechanical Engineering, Graduate School of Korea Advanced Institute of Science and Technology) ;
  • Kim, Su-Hyeon (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Gwak, Yun-Geun (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 발행 : 2001.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Power Circuit Breaker uses a variable-speed cam mechanism actuated by pre-loaded spring force. This paper presents the optimal design procedure for a variable-speed cam mechanism based on the dynamic model of a complete spring-actuated cam system. The optimal cam is compared with an original cam. Simulation results show that the dynamic behaviors of the designed cam are superior to those of the original cam.

키워드

참고문헌

  1. Chen, F.Y., 'A Survey of the State of the Art of Cam System Dynamics', Mechanism and Machine Theory, Vol.12, pp.201-224, 1977 https://doi.org/10.1016/0094-114X(77)90020-9
  2. K. Yoon and S. S. Rao, 'Cam Motion Synthesis Using Cubic Splines', Journal of Mechanical Design, Vol.115, pp.441-446, 1993
  3. Sandgren, E. and West, R.L., 'Shape optimazation of Cam Profile using a B-Spline Representation', Trans ASME, Journal of Mechanisms, Transmissions, and Automation in Design, Vol.111, pp.195-201, 1989
  4. N. Berzak, 'Optimization of Cam-Follower Systems With Kinematic and Dynamic Constraints', Journal of Mechanical Design, Vol.104, pp.29-33,1982
  5. Hong-Sen Yan, Mi-Ching Tsai and Meng-Hui Hsu, 'A Variable-Speed Method for Improving Motion Characteristics of Cam-Follower Systems', Journal of Mechanical Design, Vol.118, pp.250-258, 1996
  6. Arthur G. Erdman and George N. Sandor, Mechanism Design-Analysis and Synthesis, Volume 1, Prentice-Hall, pp.391-393, 1991
  7. Kil-Young Ahn et al, 'Modeling and Analysis for a High Speed Cam-Follower Mechanism of Power Circuit Breaker', Asia-Pacific Vibration Conference '97, November 9-13, Kyongju, Korea, pp.55-59, 1997