Dynamic Stability and Leakage Characteristics of Turbo Pump Unit Installed with High-Pressure Seals

고압 실이 장착되어 있는 터보 펌프의 동적 안정성 및 누설 특성에 관한 연구

  • 이용복 (한국과학기술원 트라이볼로지연구센터) ;
  • 곽현덕 (한국과학기술원 트라이볼로지연구센터) ;
  • 김창호 (한국과학기술원 트라이볼로지연구센터) ;
  • 하태웅 (경원대학교 건축설비기계공학부)
  • Published : 2001.11.01

Abstract

The stability and the leakage performance of turbo pump unit seals supported by elastic-ring ball bearings are Investigated for the Improvement of onset speed of instability(OSI). The numerical analysis of floating ring seal in consistence with its geometry and operating conditions is executed with detailed comparison of various seal types. The results show that the floating ring seal has superior performance in terms of rotordynamic salability compared to the ocher type seals while it shows slightly inferior leakage performance. To Improve the leakage performance. floating ring seal could be combined with hole Pattern damper or labyrinth seal surface.

Keywords

References

  1. Journal of Mechanical Engineering Science v.11 no.2 Effect of Hydraulic Forces in Annular Pressure Seals on the Vibrations of Centrifugal Pump Rotors Black, H. F.
  2. Journal of Lubrication Technology v.95 no.2 A Bulk-Flow Theory for Turbulence in Lubricant Films Hirs, G. G.
  3. University of Virginia, NASA Report Load Capacity and Hybrid Coefficients for Turbulent Interstage Seals Allaire, P. E.;Gunter, E. J.
  4. ASME Journal of Tribology v.107 Analysis and Testing for Rotordynamic Coefficients of Turbulent Annular Seals with Different Directionally-Homogeneous Surface Roughness Treatmetn for Rotor and Stator Elements Childs, D. W.;Kim, C. H.
  5. NASA technical paper Damping Seals for Turbomachinery Von Pragenau, G. L.
  6. KSME International Journal v.12 no.3 A Modeling of Pump Impeller Shroud and Wear-ring Seal as a Whole and its Application to the Pump Rotordynamics Ha, T. W.;Lee, A. S.
  7. Ph. D. Thesis, Texas A & M University Analysis and Testing for Rotordynamic Coefficients of Grooved Turbulent Annular Seals Kim, C. H.
  8. Thermal Engineering v.19 A Theoretical Analysis of the Aerodynamic Forces in the Labyrinth Glands of Turbomachineries Kostyuk, A. G.
  9. Proceedings of 2nd Workshop on Rotordynamics Instability Problems in High Performance Turbomachinery. Flow Induced Force of Labyrinth Seal Iwatsubo, T.;Motooka, N.;Kawai, R.
  10. Transactions of ASME Analysis of Eccentric Annular Incompressible Seals: Part 1 - A New Solution Using Fast Fourier Transforms for Determining Hydrodynamics Forces Nelson, C.;Nguyen, D.
  11. Journal of Tribology v.110 Analysis of Eccentric Annular incompressible Seals : Part 2 - Effects of Eccentricity on Rotordynamic Coefficients Nelson, C.;Nguyen, D.
  12. 과기부 민군겸용 Workshop Leakage and Rotordynamic Analysis of High Pressure Floating Ring Seal in Turbo Pump Unit of Liquid Rocket Engine Ha, T. W.;Lee, Y. B.;Kim, C. H.
  13. Turbomachinery Rotordynamics Childs, D. W.
  14. University of Virginia, NASA Report, UVA/528140/ME76/104 The Dynamic Analysis of the Space Shuttle Main Engine-High Pressure Fuel Turbopump Allaire, P. E.;Gunter, E. J.
  15. ASME. Journal of Applied Mechanics The Stability of an Elastic Rotor in Journal Bearing with Flexible. Damped Supports Lund, J.
  16. 한국소음진동공학회 춘계학술대회 논문집 탄성 링을 갖는 볼 베어링 지지의 터보 펌프 임계속도에 관한 연구 이용복;김창호;곽현덕;하태웅;우유철
  17. Journal of Aeronautics v.11 A New Method for Calculating Natural Modes of Uncoupled Bending Vibration of Airplane Wings and Other Type Beams Myclestad, N. O.
  18. ASME. Journal of Applied Mechanics A General Method for Calcuting Critical Speeds of Flexible Rotors Prohl, M. A.
  19. Journal of Engineering for Industry, ASME-73-DET-103 Stability and Damped Critical Speeds of A Flexible Rotor in Fluid-Film Bearings Lund, J. W.
  20. Journal of Engineering for Power, ASME-82-GT-294 An Improved Method for Calculating Critical Speeds and Rotordynamic Stability of Turbomachinery Murphy, B. T.;Vance, J. M.
  21. Journal of Engineering For Industry v.97 Stability and Damped Critical Speeds of Rotor-Bearing Systems Bansal, P. N.;Kirk, R. G.