Behavior of Intermetallic Compound Formation in Al-25Nb system and (Al,X)-25Nb (X= Cr, Cu, Fe, Mn) systems by Mechanical Alloying Method

A1-25Nb계와 (A1,X)-25Nb계 (X = Cr, Cu, Fe, Mn)의 기계적 합금화에 의한 금속간 화합물의 형성 거동에 관한 연구

  • Choi, Jae-Woong (Division of Materials Science and Engineering, Hanyang Univ) ;
  • Kang, Sung-Goon (Division of Materials Science and Engineering, Hanyang Univ)
  • 최재웅 (한양대학교 공과대학 재료공학부) ;
  • 강성군 (한양대학교 공과대학 재료공학부)
  • Published : 2001.09.01

Abstract

In Al-25Nb binary system, it was observed only formation of $D0_{22}$ $Al_3Nb$ intermetallic compound after 5hr milling but it was not observed formation of meta stable phase like L1$_2$ phase. In this state, $D0_{22}$ $Al_3Nb$ fabricated had nano sized grain of approximately 20nm. Ternary systems, transition metals such as Cr, Cu, Fe, Mn were added 6~12at.% as substitution of Al, showed formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. In Al- l2Cu-25Nb system, it was observed that broad XRD pattern like amorphization of Al and not observed formation of $D0_{22}$ $Al_3Nb$ after 5hr milling. But there was mixed phase of a lot of amorphous Al and little $D0_{22}$ $Al_3Nb$ through TEM. In the states of unalloyed, 5~7hr milling time, those showed exothermic reaction at 35$0^{\circ}C$, which was formation of $D0_{22}$ $Al_3Nb$ like Al-25Nb binary system. With increasing milling time to 10hr, $D0_{22}$ $Al_3Nb$ was transformed to mixed phase of amorphous and nanocryatlline, having approximately 10nm grain but the meta stable $Al_3Nb$ was not fabricated by adding transition metals.

Keywords

References

  1. I. Baker and P.R. Munroe, J. of Metals, 40(2), 28 (1988)
  2. D. Shechtman and L.A. Jacobson, Metall. Trans., 6A, 1325 (1975) https://doi.org/10.1007/BF02641924
  3. S. Zhang, J.P. Nic and D.E. Mikkola, Scrip. Metall. et Mat., 24, 57 (1990) https://doi.org/10.1016/0956-716X(90)90566-Y
  4. M. Yamaguchi and H. Inui, Intermetallic Compounds, 2, 147 (1994)
  5. P.R. Subramanian and J.P. Simmons, Scrip. Metall. et Mat., 25, 231 (1991) https://doi.org/10.1016/0956-716X(91)90386-F
  6. S. Suryanarayana, E. Zhou, Z. Peng and F.H. Froes, Scrip. Metall. et Mat., 30(6), 781 (1994) https://doi.org/10.1016/0956-716X(94)90199-6
  7. A.E. Carlsson and P.J. Meschter, J. Mater. Res., 4(5), 1060 (1989) https://doi.org/10.1557/JMR.1989.1060