초록
최근 철근콘크리트 골조 구조물에 대한 장기변형 특성을 고려하여 고층건물의 설계 및 시공에 적용하려는 연구가 활발하게 진행되고 있다. 그러나 기존의 연구에서 고려하고 있는 시공단계는 reshoring을 고려하지 못하고 거푸집제거 및 shoring을 한 단계로 고려하기 때문에 동바리를 제거하기전의 초기재령에서 발생하는 변형을 고려하지 못한다. 본 연구에서는 동바리의 설치/제거를 포함한 실제적인 시공과정을 고려하여 거푸집의 강성, 동바리의 강성 그리고 시간에 따른 콘크리트의 강성의 변화에 따른 축력변화를 예측할 수 있는 2차원 골조해석 프로그램을 개발하였다. 예제해석결과 동바리의 축력이 시간에 따라서 감소한다. 또한, 동바리의 개수와 상관없이 기둥과 동바리와의 축력 재분배에 의해서 외측기둥에는 실제 설계 값보다 비탄성 하중이 작게 작용하고 내측 기둥에서는 크게 나타난다. 한편, 프로그램의 타당성을 검증하기 위하여 실제 철근콘크리트 골조 구조물을 타설-거푸집 제거-reshoring-동바리 제거-부가하중작용과 같은 일반적인 시공순서에 따라서 제작하였다. 실험결과 동바리를 제거하기 전에 기둥에 변형이 발생하며 동바리의 축력이 기둥에 분배되었다. 따라서 개발된 해석프로그램은 실험결과를 비교적 잘 예측하였다.
To apply the research results to the design and the construction of the high rise buildings, long-term behavior of reinforced concrete structure have been widely studied. However, shoring and reshoring at early ages have not been considered in the most of studies. The removal of forms and shores has been dealt with one construction sequence. i.e. the deformation occurred at the early age before the removal of shore has been neglected. In this paper, two-dimensional frame analysis program for long-term behavior of reinforced concrete was developed. In the developed program, construction sequence including the settlement and the removal of shores is considered to predict axial force variation due to forms ,shores, and time-dependent concrete stiffness. Analysis results show that the time-dependent axial force of shores is reduced, and the redistributed axial force of the interior column is greater than the value by elastic analysis and that of the exterior column is smaller. In order to demonstrate the validity of this program, the test frame was constructed in sequence of the placement of concrete, form removal, reshoring, shore removal, and the application of additional load. The proposed program predicts experimental results well.