Design of Improved EMI Filter

개선된 EMI Filter 설계 및 제작

  • 배대환 (한국해양대학교 전자통신공학과) ;
  • 구동우 (한국해양대학교 전파공학과) ;
  • 김동일 (한국해양대학교 전파공학과) ;
  • 송재만 (산업기술연구소)
  • Published : 2001.07.01

Abstract

As electronic industry and radio communication technologies progress, the electrical and electronic equipments are lightened, minimized, and operated by low power. At the same time, these equipments react sensitively by electromagnetic wave noise. It is a origine these equipments to wrong-operation. In this paper, we focused on the design and preperation condition of a advanced EMI filter. This filter sowed superior attenuation effect of 10 dB~20 dB compare with typical filter in the range of frequency from 150 kHz to 30 GHz and superior character over the variation of a load.

전자산업 및 전파통신기술의 급속한 발달에 따라 전기, 전자장치의 경량화, 소형화, 저전력화와 더불어 이들은 인위적인 제어가 어려운 자연 현상에 의한 미소한 전자파장해에도 민감하게 감응하여 오동작을 일으키는 사례가 늘고 있다. 본 논문에서는 이에 대한 개선책의 하나로 기존의 EMI 필터보다 150 kHz~30 GHz 대역에서 10 dB~20 dB 감쇠 효과를 더 가지는 개선된 EMI 필터를 설계 제작하여 전자파 노이즈가 내부 또는 외부로 유출.입 되는 것을 방지하고 부하 변동에 따라 특성의 변화가 없는 EMI 필터로 설계 제작하였다.

Keywords