Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지

Shape Optimization of the H-shape Spacer Grid Spring Structure

  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In pressurized light water reactor fuel assembly, spacer grids support nuclear fuel rods both laterally and vertically. The fuel rods are supported by spacer grid springs and grid dimples that are located in the grid cell. The support system allows for some thermal expansion and imbalance of the fuel rods. The imbalance is absorbed by elastic energy to prevent coolant flow- induced vibration damage. Design requirements are defined and a design process is established. The design process includes mathematical optimization as well as practical design method. The shape of the grid spring is designed to maintain its function during the lifetime of the fuel assembly. A structural optimization method is employed for the shape design. Since the optimization is carried out in the linear range of finite element analysis, the optimum solution is verified by nonlinear analysis. A good design is found and the final design is compared with the initial conceptual design. Commercial codes are utilized for structural analysis and optimization.

Keywords

References

  1. K. N. Song et al., Fuel Assembly Mechanical Design and Engineering, KAERI, (1986)
  2. I-DEAS User's Manual, Ver. 7m1, Structural Dynamics Research Corporation, OH, USA, (1999)
  3. H. D. Hibbitt, G. I. Karlsson, and E. P. Sorensen, ABAQUS/Standard User's Manual(version 5.8), Vol. I and II, Hibbitt, Karlsson & Sorensen Inc., Pawtucket, R.I., USA, (1998)
  4. J. S. Arora, Introduction to Optimum Design, McGraw-Hill Book Company, New York, (1989)
  5. R. T. Haftka, and Z, Gurdal, Z., Elements of Structural Optimization, Kluwer Academic Publishers, Netherlands, (1992)
  6. S. K. Choi, Design of a Nuclear Feul Rod Support Grid Using Axiomatic Design, M. S. Thesis, Hanyang University, Korea, (2001)
  7. G. J. Park, Impact Analysis of Spacer Grid Assemble and Shape Optimization of Spacer Strap,' KAERI Research Report, Hanyang University, Korea, (2001)
  8. GENESIS Ver. 60 User's Manual, VR&D, Colorado Springs, CO, USA, (2000)
  9. K. H. Yoon et al., Spacer Grid with H-spring for Fuel Rods for Use in Nuclear Reactor Fuel Assemblies, US Patent No. 6167105, (2000)
  10. K. N. Song and Kunz, Design of the Fuel Assembly Structure with Zircaloy Spacer Grids, KAERI/KWU Work Report, U6 312/87/e278, (1987)
  11. J. E. Talor, and M. P. Bendsoe, An Interpretation For Min-Max Structure Design Problems Including a Method for Relaxing Constraints, Int, J. Solid Sturctures, Vol. 20, No. 4, pp. 301-314, (1984) https://doi.org/10.1016/0020-7683(84)90041-6
  12. H. K. Kim, and S. J. Kim, Development of Algorithm for Wear Volume Evaluation using Surface Profile Analysis, J. Korean Society of Tribologists and Lubrication Engineers, Vol. 17, No. 1, pp. 33-39, (2001)