The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Parameter Identification of Induction Motor from Step Response

계단응답을 이용한 유도 전동기 파라미터 식별

  • Published : 2001.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an identification method of parameters of induction motor which is driven by PWM voltage inverter. The method uses least square estimation based on the step voltage input and current response. Utilizing the fact that ratio of two characteristic roots is large in the induction motor circuit, we derived two 1st-order difference equations for direct computation of parameter values. experimental results are compared with conventional motor test results to demonstrate that the proposed method is capable of estimating parameters of induction motor at standstill.

Keywords

References

  1. Bose, B.K., Power Electronics and Variable Frequency Drives, IEEE Press, New York, 1996
  2. Borgard, D.E., Olsson, G. and Lorenz, R.D., 'Accuracy Issues for Parameter Estimation of Field Oriented Induction Machine Drives,' IEEE Trans. Ind. Appl. Vol. 31, No.4, pp. 795-801, 1995 https://doi.org/10.1109/28.395289
  3. Bertoluzzo, M., Buja, G.S. and Menis, R., 'Inverter Voltage Drop-free Recursive Least-Squares Parameter Identification of a PWM Inverter-fed Induction Motor at Standstill,' Proceedings of the IEEE International Symposium on Industrial Electronics, Vol. 2, PP. 649 -654, 1997 https://doi.org/10.1109/ISIE.1997.649043
  4. Gastli, A, 'Identification of Induction Motor Equivalent Circuit Parameters Using The Single-Phase Test,' IEEE Trans. Energy Conversion, Vol. 14, No. I, pp. 51-56, 1999 https://doi.org/10.1109/60.749147
  5. Moon, S.I. and Keyhani, A, 'Estimation of Induction Machine Parameter from Standstill Time-Domain Data,' IEEE Trans. Ind. Appl., Vol. 30, No.6, pp. 1609-1615, 1994 https://doi.org/10.1109/TIA.1994.350316
  6. Buja, G.S., Menis, R. and Valla, M.I., 'MRAS Identification of the Induction Motor Parameters in PWM Inverter Drives at Standstill,' IEEE IECON 21st International Conference, Vol. 2, PP. 1041-1047, 1995 https://doi.org/10.1109/IECON.1995.483939
  7. Seok, J.K., Moon. S.I. and Sul. S.K., 'Induction Machine Parameter Identification Using PWM Inverter at Standstill,' IEEE Trans. Energy Conversion, Vol. 12, No.2, pp. 127-132, 1997 https://doi.org/10.1109/60.629694
  8. Zai. L.C., DeMarco, C.L, and Lipo, T.A., 'An Extended Kalman Filter Approach to Rotor Time Constant Measurement in PWM Induction Motor Drives,' IEEE Trans. Ind. Appl. Vol. 28, No. I, pp. 96-104, 1992 https://doi.org/10.1109/28.120217
  9. Attaianese, C., Damiano, A, Gatto, G., Marongiu, I. and Perfetto, A, 'Induction Motor Drive Parameters Identification,' IEEE Trans. Power Electronics, Vol. 13, No.6, pp. 1112-1122, 1998 https://doi.org/10.1109/63.728338
  10. 최정우, 설승기, '새로운 데드타임보상법을 이용한 인버터 출력전압의 합성,' 전기학회 논문지 44권 4호, pp. 453-459, 1995
  11. Jer-Nan Jung, Applied System Identification, Prentice Hall, 1994