DOI QR코드

DOI QR Code

Postbuckling strength of an axially compressed elastic circular cylinder with all symmetry broken

  • 발행 : 2001.02.25

초록

Axially compressed circular cylinders repeat symmetry-breaking bifurcation in the postbuckling region. There exist stable equilibria with all symmetry broken in the buckled configuration, and the minimum postbuckling strength is attained at the deep bottom of closely spaced equilibrium branches. The load level corresponding to such postbuckling stable solutions is usually much lower than the initial buckling load and may serve as a strength limit in shell stability design. The primary concern in the present paper is to compute these possible postbuckling stable solutions at the deep bottom of the postbuckling region. Two computational approaches are used for this purpose. One is the application of individual procedures in computational bifurcation theory. Path-tracing, pinpointing bifurcation points and (local) branch-switching are all applied to follow carefully the postbuckling branches with the decreasing load in order to attain the target at the bottom of the postbuckling region. The buckled shell configuration loses its symmetry stepwise after each (local) branch-switching procedure. The other is to introduce the idea of path jumping (namely, generalized global branch-switching) with static imperfection. The static response of the cylinder under two-parameter loading is computed to enable a direct access to postbuckling equilibria from the prebuckling state. In the numerical example of an elastic perfect circular cylinder, stable postbuckling solutions are computed in these two approaches. It is demonstrated that a direct path jump from the undeformed state to postbuckling stable equilibria is possible for an appropriate choice of static perturbations.

키워드

참고문헌

  1. Almroth, B.O. (1963), "Postbuckling behavior of axially compressed circular cylinders", AIAA Journal, 1, 630- 633. https://doi.org/10.2514/3.1606
  2. Bushnell, D. (1989), Computerized Buckling Analysis of Shells, Kluwer Academic Publishers, Dordrecht.
  3. Choong, K.K. and Ramm, E. (1996), "Simulation of the dynamic buckling process of cylindrical shells by finite element method", Proceedings of International Conference on Advances in Steel Structures, ICASS '96, Ed., Chan S.L. and Teng, J.G., Vol. II, Hong Kong, Dec., 857-862.
  4. Choong, K.K. and Ramm, E. (1998), "Simulation of buckling process of shells by using the finite element method", Thin-Walled Structures, 31, 39-72. https://doi.org/10.1016/S0263-8231(98)00002-0
  5. Crisfield, M.A. (1979), "A fast incremental/iterative solution procedure that handles snap-through", Computers & Structures, 13, 387-399.
  6. Deml, M and Wunderlich, W. (1997), "Direct evaluation of the worst imperfection shape in shell buckling", Computer Methods in Applied Mechanics and Engineering, 149, 201-222. https://doi.org/10.1016/S0045-7825(97)00055-8
  7. Donnell, L.H. (1934), "A new theory for the buckling of thin cylinders under axial compression and bending", Trans. ASME, 56, 795-806.
  8. Fujii, F. and Choong, K.K. (1992), "Branch-switching in bifurcation of structures", J. Eng. Mech. ASCE, 118, 1578-1595. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:8(1578)
  9. Fujii, F., Ikeda, K., Noguchi, H. and Okazawa, S. (2001), "Modified stiffness iteration to pinpoint multiple bifurcation points", Computer Methods in Applied Mechanics and Engineering (forthcoming).
  10. Fujii, F. and Noguchi, H. (1999), "Symmetry-breaking bifurcation and postbuckling strength of a compressed circular cylinder", Computational Mechanics for the Next Millennium, Proceedings of APCOM'99, Singapore, Ed., by Wang, C.M., Lee, K.H. and Ang, K.K., Pergamon, 1, 563-568.
  11. Fujii, F., Noguchi, H. and Ramm, E. (1998), "Static path jumping and stable postbuckling equilibria of an axially compressed circular cylindrical shell", Proceedings of International Conference on Computational Engineering Science, Atlanta, (ICES'98), Ed. by Atluri, S.N. and OíDonoghue, P.E., Tech Science Press, I, 637-642.
  12. Fujii, F., Noguchi, H. and Ramm, E. (2000), "Static path jumping to attain postbuckling equilibria of a compressed circular cylinder", Computational Mechanics, 26(3), 259-266. https://doi.org/10.1007/s004660000170
  13. Fujii, F. and Okazawa, S. (1997a), "Pinpointing bifurcation points and branch-switching," Journal of Engineering Mechanics, ASCE, 123, 179-189. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(179)
  14. Fujii, F. and Okazawa, S. (1997b), "Bypass, homotopy path and local iteration to compute the stability point", Structural Engineering and Mechanics, 5(5), 577-586. https://doi.org/10.12989/sem.1997.5.5.577
  15. Fujii, F. and Ramm, E. (1997), "Computational bifurcation theory-path-tracing, pinpointing and path-switching", Engineering Structures, 19(5), 385-392. https://doi.org/10.1016/S0141-0296(96)00094-6
  16. Hoff, N.J., Madsen, W.A. and Mayers, J. (1966), "Postbuckling equilibrium of axially compressed circular cylindrical shells", AIAA Journal, 4, 126-133. https://doi.org/10.2514/3.3395
  17. Hutchinson, J.W. and Koiter, W.T. (1971), "Postbuckling theory", Applied Mechanics Review, 23, 1353-1362.
  18. Karman, Th. von and Tsien, H.-S. (1941), "The buckling of thin cylindrical shells under axial compression", Journal of the Aerospace Sciences, 8, 302-312.
  19. Koiter, W.T. (1945), "On the stability of elastic equilibrium", PhD Dissertation, Delft, The Netherlands, English Translation in NASA TT F-10, 833 1967.
  20. Maewal, A. and Nachbar W. (1977), "Stable postbuckling equilibria of axially compressed, elastic circular cylindrical shells-A finite-element analysis and comparison with experiments", Journal of Applied Mechanics, 7, 475-481.
  21. Noguchi, N. and Hisada, T. (1993), "Sensitivity analysis in post-buckling problems of shell structures", Computers & Structures, 47(4/5), 699-710. https://doi.org/10.1016/0045-7949(93)90352-E
  22. Ramm, E. (1980), "Strategies for tracing the nonlinear response near limit points", Nonlinear Finite Element Analysis in Structural Mechanics, Proc. Europe-US Workshop, Springer-Verlag, 63-89.
  23. Riks, E., Rankin, C.C. and Brogan, F.A. (1996), "On the solution of mode jumping phenomena in thin-walled shell structures", Computer Methods in Applied Mechanics and Engineering, 36, 59-92.
  24. Wagner, W. and Wriggers, W. (1988), "A simple method for the calculation of post-critical branches", Engineering Computation, 5, 103-109. https://doi.org/10.1108/eb023727
  25. Wohlever, J.C. and Healey, T.J. (1995), "A group theoretic approach to the global bifurcation analysis of an axially compressed cylindrical shell", Computer Methods in Applied Mechanics and Engineering, 122, 315- 349. https://doi.org/10.1016/0045-7825(94)00734-5
  26. Wriggers, P., Wagner, W. and Miehe, C. (1987), "A quadratically convergent procedure for the calculation of stability points in finite element analysis", Computer Methods in Applied Mechanics and Engineering, 70, 329-347.
  27. Yamaki, N. (1984), Elastic Stability of Circular Cylindrical Shells, North-Holland, Amsterdam.

피인용 문헌

  1. Eigenvector-free indicator, pinpointing and branch-switching for bifurcation vol.19, pp.6, 2003, https://doi.org/10.1002/cnm.604