Composite Beam Element for Nonlinear Seismic Analysis of Steel Frames

강재 골조의 비선형 지진해석을 위한 합성 보 요소

  • 김기동 (공주대학교 토목환경공학과) ;
  • 고만기 (공주대학교 토목환경공학과) ;
  • 이규세 (선문대학교 토목환경공학과) ;
  • 황병국 (공주대학교 토목환경공학과)
  • Received : 2002.07.11
  • Published : 2002.10.27

Abstract

This study presented a composite beam element for modeling the inelastic behavior of the steel beam, which has composite slabs in steel moment frames that are subjected to earthquake ground motions. The effects of composite slabs on the seismic behavior of steel moment frames were investigated. The element can be considered as a single-component series hinge type model whose predicted analytical results were consistent with the experimental results. Likewise, the element showed a significantly better performance than the bare steel beam elements. The composite model can also predict more accurately the local deformation demands and overall response of structural systems under earthquake loading compared with the bare steel models. Therefore, composite stabs can significantly affect locally and globally predicted responses of steel moment frames.

지진 하중에 대한 강재 모멘트 골조의 합성 슬래브를 포함한 강재 보의 비탄성 거동을 모델하기 위한 합성 보 요소가 제안되고 강재 모멘트 골조의 지진 거동에 대한 합성 슬래브의 효과가 조사된다. 합성 보 요소는 단일 직렬 힌지 모델로 간주 될 수 있고, 그 해석 결과는 실험결과와 매우 합리적인 상관 관계를 보였다. 합성 보 요소는 기존의 강재 보 요소보다 상당히 좋은 거동을 보이고, 합성모델은 지진 하중 하에서의 구조물의 국부변형과 전체 응답을 기존의 강재 모델보다 정밀하게 예측할 수 있다. 합성 슬래브는 강재 모멘트 골조의 국부 및 전체 해석 응답에 상당히 큰 효과를 나타낸다.

Keywords

References

  1. Experiments on composite beams under positive end moment, Rep. No. 374.2 duPlessis, D.P.;Daniels, J.H.
  2. Parametric studies on inelastic modeling of steel moment frames, Tech. Rep. SAC 95-05 Engelhardt, M.D.;Kim, K.D.(et al.)
  3. Behavior and design of radius-cut reduced beam section connections, Rep. No. SAC/BD-00/17 Engelhardt, M.D.;Fry, G.T.;Jones, S.;Venti, M.;Holliday, S.
  4. Test of a free flange connection with a composite floor slab, Rep. No. SAC/BD-00/18 Engelhardt, M.D.;Venti, M.J.
  5. Engrg. Journal. AlSC v.14 no.1 Composite beams with formed steel deck Grant, J.A.;Fisher, J.W.;Slutter, R.G.
  6. Uniform building code International Conference of Building Officials
  7. DRAIN-2D: a general purpose computer program for dynamic analysis of inelastic plane structures-with user's guide, EERC Rep. No. 73/6 and 73/22 Kanaan, A.E.;Powell, G.H.
  8. Development of analytical models for earthquake analysis of steel moment frames, Res. Rep. PMFSEL 95-2 Kim, K.D.;Engelhardt, M.D.
  9. J. Struct. Engrg., ASCE v.126 Beam-column element for nonlinear seismic analysis of steel frames Kim, K.D.;Engelhardt, M.D.
  10. J. Const. Steel Research v.58 no.5-8 Monotonic and cyclic loading models for panel zones in steel moment frames Kim, K.D.;Engelhardt, M.D.
  11. Seismic behavior of steel building structures with composite slabs Lee, S.J.
  12. Engrg. Journal, AlSC v.8 no.2 Shear strength of stud connectors in lightweight and normal concrete Ollgaard, J.G.;Slutter, R.G.;Fisher, J.W.
  13. Theory of matrix structural analysis Przemieniecki, J.S.
  14. Dynamic analysis of seismically resistant eccentrically braced frames, EERC Rep. No. 87/07 Ricles, J.M.;Popov, E.P.
  15. J. Struct. Div., ASCE v.91 no.ST2 Flexural strength of steel-concrete composite beams Slutter, R.G.;Driscoll, G.C.
  16. Recommended lateral force requirements Structural Engineers Association of California
  17. Proc., Pacific Struct. Steel Conf. Composite effect of concrete slabs and strength of composite girders under seismic loading Tagawa, Y, Aoki, H.;Kato, B.
  18. J. Struct. Div., ASCE v.115 no.8 Behavior of composite beams in steel frame under hysteretic loading Tagawa, Y.;Kato, B.;Aoki, H.
  19. Experimental and analytical study of the hysteretic behavior of steel composite girders, Rep. CE 299 Uang, C.M.
  20. Composite assemblage experiments, Rep. No. 403.2 Wenk, T.;Daniels, J.B.