Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Environmentally Conscious Machining Technology Cutting Fluid Atomization and Environmental Impact through Spin-Off Mechanism in fuming Operation(1)

환경 친화적 기계가공 기술에 관한 연구 선삭가공시 회전분리기구에 의한 절삭유 미립화와 환경영향(I)

  • Hwang, Joon (ChungJu National University) ;
  • Chung, Eui-Sik (Dept. of Mechanical Design Engineering, Hanbat National University)
  • 황준 (충주대학교 기계설계학과) ;
  • 정의식 (한밭대학교 기계설계공학과)
  • Published : 2002.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the experimental results to verify the environmental consciousness with economic balances due to cutting fluid behaviors, effectiveness in machining process. Even though cutting fluid improves the Productivity through the cooling, lubricating effects, its environmental impact is also increased according to the cutting fluid usage. The primary mechanism considered in this study is the spin-off motion of fluids away from rotating workpiece. In this study some parameters arc adopted to analyze the productivity(tool wear), environmental impact(mist diffusion rate). The results present talc criteria for the resonable cutting fluid usage quantitative1y to develop the environmentally conscious machining process.

Keywords

References

  1. Pfeifer, T., Eversheim, W., Konig, W., 'Manufacturing Excellence,' pp. 517-521, 1994
  2. Zhao, Z., Hong, S. Y., 'Cooling Strategies for Cryogenic Machining from a Materials Viewpoint,' J. of Materials Engineering and Performance, Vol. 1, No. 5, pp. 615-619, 1992 https://doi.org/10.1007/BF02649248
  3. U.S. Department of Health and Human Services, 'Occupational Exposure to Metalworking Fluids,' NIOSH Pub., No. 98-102, 1998
  4. Bayvel, L., Orzechowski, Z., 'Liquid Atomization, Combustion,' Taylor & Francis, 1993
  5. Hwang, J., Chung, E. S., 'Optimization of Cutting Fluids for Environmentally conscious Machining,' KSPE Annual Conference, Vol. 2, pp. 948-951, 2000