DOI QR코드

DOI QR Code

Electrical Characteristics of (BaSr)TiO3-based PTCR Devices under the Electric Field

  • Lee, Joon-Hyung (Department of Inorganic Materials, Kyungpook Natinal University) ;
  • Cho, Sang-Hee (Department of Inorganic Materials, Kyungpook Natinal University)
  • Published : 2002.01.01

Abstract

Semiconducting (Ba.Sr)TiO$_3$ceramic device, which shows the PTCR effect, has been usually used as a current limiter. In this case, the device should endure the condition under the high electric field. In this study, the dynamic electrical properties of the PTCR device under high voltage has been evaluated. Two different formulated powders were used and the sintered bodies exhibited the different grain size and porosity. The wide range of characterization such as complex impedance spectroscopy, microstructure, I-V characteristics and voltage dependence of resistivity of the samples were performed. The PTCR effect of the specimen containing coarse grains was very sensitively dependent on the AC electric field, showing that it was inversely pro-portional to the grain boundary potential barrier. The withstanding voltage was proportional to the potential barrier of grain boundary.

Keywords

References

  1. J. Am. Ceram. Soc. v.47 no.10 Resistivity Anamaly in Doped Barium Titanat W. Heywang https://doi.org/10.1111/j.1151-2916.1964.tb13795.x
  2. Sol. State Electron. v.3 Barium Titanate as a Semiconductor with Blocking Layer W. Heywang https://doi.org/10.1016/0038-1101(61)90080-6
  3. Advances in Ceramics;Grain Boundary Phenomena in Electronic Ceramics v.1 PTC Materials Technology, 1955-1980 B. Kulwicki;L. M. Levinson(ed.)
  4. J. Am. Ceram. Soc. v.64 no.10 PTC Effect in $BaTiO_3$ as a Function of Doping with 3d Elements H. Ihring https://doi.org/10.1111/j.1151-2916.1981.tb10228.x
  5. J. Kor. Ceram. Soc. v.32 no.1 The Role of Mn on the PTCR Characteristics of La-doped $BaTiO_3$ Ceramics S. H. Kim;J. H. Lee;S. H. Cho
  6. J. Kor. Ceram. Soc. v.33 no.9 Sintering and Electrical Charateristics of Semiconducting BaTiO_3$ Ceramics with addition of $BaB_2O_4$ Y. W. Heo;J. H. Lee;J. J. Kim;N. K. Kim;S. H. Cho
  7. Trans. AIME v.3 Measurement of Particle Size on Opaque Bodies R. L. Fullmann
  8. Smitomo Metal v.42 Complex Impedance Analysis on Nb-doped (BaSr) TiO₃PTC Thermistor T. Yamamoto;S. Tako
  9. J. Am. Ceram. Soc. v.54 no.6 Effect of Grain Size on the Resistivity Anomaly in Semiconductive BaTiO₃Ceramics N. Hirose;H. Sasaki https://doi.org/10.1111/j.1151-2916.1971.tb12303.x
  10. Ceramic Materials for Electronics v.265-374 Ceramic Sensors: Theory and Practice D. C. Hill;H. L. Tuller;R. C. Buchanan(ed.)
  11. Ceramic Transactions;Grain Boundaries and Interfacial Phenomena in Electronic Ceramics v.41 Role of Porosity on PTCR Characteristics of Semiconducting BaTiO₃Ceramics J. H. Lee;J. J. Kim;S. H. Cho
  12. J. Mater. Sci. v.6 Semiconducting Barium Titanate W. Heywang https://doi.org/10.1007/BF00550094
  13. J. Am. Ceram. Soc. v.78 no.10 Valency Change of Mn Ions in $BaTiO_3$-based PTCR Materials J. H. Lee;S. H. Kim;S. H. Cho https://doi.org/10.1111/j.1151-2916.1995.tb08065.x
  14. Mater. Res. Bull. v.2 Halogen Treatment of Barium Titanate Semiconductor G. H. Jonker https://doi.org/10.1016/0025-5408(67)90079-7
  15. Advances in Ceramics;Grain Boundary Phenomena in Electronic Ceramics v.1 Equillibrium Barriers in PTC Thermistors G. H. Jonker;L. M. Levinson(ed.)
  16. J. Ceram. Soc. Jpn. v.103 no.10 Characterization of Interface Status in Semiconducting (Ba,Sr) TiO₃Ceramics by Isothermal Transient Capacitance Method N. Tsuda;M. Kuwabara https://doi.org/10.2109/jcersj.103.1006
  17. J. Kor. Ceram. Soc. v.25 no.1 Effect of Additives on the PTCR Characteristics of $La^{3+}$ Doped $(Ba_{1-x}Ca_x)TiO_3$ Ceramics W. H. Kang;B. I. Oh;J. H. Kim;K. H. Lee