Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Creep Behavior Analysis of 25Cr-20Ni Stainless Steels by Omega Method

오스테나이트계 25Cr-20Ni 스테인리스강의 Ω법을 이용한 고온 크리프 거동 해석

  • Published : 2002.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

For two kinds of 25Cr-20Ni stainless steels, STS310J1TB and STS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392 MPa and from 923 to 773 K with a special reference to tertiary creep. The average creep life of STS310J1TB was about 100 times longer than that of the STS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in STS310J1TB, while that of the STS310S was 274kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for STS310S below PLB is close to the for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for STS310J1TB was reduced to the activation energy for diffusion of chromium atom in gamma steel. The stress exponent of STS310S was about 12.3 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for STS310J1TB was in a power law creep region, its stress exponent was 7.9 larger than that of STS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in STS310J1TB.

Keywords

References

  1. 김영진, 박종주, 석창성, 1996, '고온 수명평가를 위한 수정 크리프-피로 손상모델의 개발,' 대한기계학회논문집, 제 20 권, 제 11 호, pp. 3424-3432
  2. 현중섭, 백수곤, 송기욱, 1998, '소성변형에너지에 의한 유지시간효과를 고려한 1Cr-0.5Mo 강의저 사이클 크리프-피로 수명예측에 관한 연구,' 대한기계학회논문집 A, 제22권, 제12호, pp. 2093-2099
  3. 김종범, 이형연, 유봉, 1998, '크리프-피로 하중하에서 손상을 받은 304 및 316LN 스테인리스강 구조물의 손상평가,' 대한기계학회논문집, 제 22 권, 제 12 호, pp. 2269-2277
  4. 김우곤, 김대환, 류우석, 2000, '316L(N) 스테인 리스강의 Monkman-Grant 크리프 수명식의 적용성,' 대한기계학회논문집, 제 24 권, 제 9 호, pp. 2326-2333
  5. Sawaragi Y., Teranishi H., Makiura H., Miura M. and Kubota M., 1985, 'ボイラ用高耐食高强度 HR3C 鋼管の開發,' Sumitomo Metals, 37, pp. 166-179
  6. TanakaR., Shinoda T. and Tobe Y., 1979, '25Cr-20Ni 耐熱鋼の高溫諸性質におよぼすMo, N およびCの影響,' TETSU-TO-HAGANE, 56, pp. 1014-1033
  7. Goodell P. D., Cullen T. M. and Freeman J. W., 1967, 'The Influence of Nitrogen and Certain Other Elements on the Creep-Rupture Properities of Wholly Austenitic Type 304 Steel,' Trans. ASME, J. of Basic Engineering, pp. 517-524
  8. Hujita T., 1963, 'Effect of Nitrogen on Long Period Creep Rupture Strength of 12%Chromium Heat Resisting Steels,' TETSU-TO-HAGANE, 49, pp. 1563-1565
  9. Endo T. and Masuyama F., 1997, 'クリ一プ擧動解析法の最近の進法と 實用合金への滴用,' Material Japan, 36, pp. 225-231 https://doi.org/10.2320/materia.36.225
  10. Prager M., 1994, 'The Omega Method-An Effective Method for Life and Damage Prediction in Creep Tests and Service,' Proc.of 10th Int. Conf. on Strength of material, JIM, pp. 571-575
  11. Prager M., 1994, 'Service and Reliability Improvement: Nuclear, Fossil and Petrochemical Plants,' ASME, PVP-vol. 288, pp. 401-421
  12. Endo T. and Shi J., 1994, 'Factors Affecting Creep Rate and Creep Life of a 2.25Cr-1Mo Steel under Constant Load,' Strength of Materials, Ed. by Oikawa H., Maruyama K., Takeuchi S. and Yamaguchi M., JIM, pp. 665-668
  13. Oikawa H. and Langdon T. G., 1985, 'Creep Behaviour of Crystalline Solids,' Ed. by Wishire B. and Evans R. W., Pinceridge Press, UK, pp. 33-82
  14. Sherby O. D. and Burker P. M., 1966, 'Progress in Materials science,' 13, pp. 340-369
  15. J. Cadek, 1987, 'べき乘則クリ一プにおける逆?力の槪念,' Bulletin of the Japan Insitute of Metals, 26, pp. 404-412
  16. Monma K., Suto H., Sotome K. and Nemoto T., 1965, '低合金鋼の高溫硬度におよばす合金元業の影響について,' J. Japan Inst. Metals, 29, pp. 191-196 https://doi.org/10.2320/jinstmet1952.29.2_191
  17. Brandes E. A., 1983, 'Smithells Metals Reference Book,' sixth edition, pp. 13-14
  18. Barrett C. R., Ardell A. J. and Sherby O. D., 1964, 'Influence of Modulus on the Temperature Temperatures,' Trans. AIME, 230, pp. 200-204
  19. Cadek J., 1988, 'Creep in Metallic Materials,' ELSEVIER, pp. 44-51
  20. 'Metal Data Book,' 1984, J. Japan Inst. Metals, pp. 181-183