DOI QR코드

DOI QR Code

Low Temperature Sintering and Microwave Properties in (Mg0.93Ca0.07)TiO3 Ceramics

(Mg0.93Ca0.07)TiO3 세라믹스의 저온소결과 마이크로파 유전특성

  • Shin, Dong-Soon (Department of Materials Science and Engineering, Korea University) ;
  • Choi, Young-Jin (Department of Materials Science and Engineering, Korea University) ;
  • Park, Jae-Gwan (Multifunctional Ceramics Research Center, Korea Institute of Science and Technology) ;
  • Park, Jae-Hwan (Multifunctional Ceramics Research Center, Korea Institute of Science and Technology) ;
  • Nahm, Sahn (Department of Materials Science and Engineering, Korea University)
  • 신동순 (고려대학교 재료공학과) ;
  • 최영진 (고려대학교 재료공학과) ;
  • 박재관 (한국과학기술연구원 복합기능세라믹스연구센터) ;
  • 박재환 (한국과학기술연구원 복합기능세라믹스연구센터) ;
  • 남산 (고려대학교 재료공학과)
  • Published : 2002.06.01

Abstract

The effects of alumine borosilicate glass composition on the densification and the microwave properties of (M $g_{0.93}$C $a_{0.07}$)Ti $O_3$ ceramics were studied. As the amount of glass increase, the density of ceramics increases and grain growth enhances. When 20 ~30 wt% of glass added, it was densified to over 95% of (M $g_{0.93}$C $a_{0.07}$)Ti $O_3$ theoretical density. (M $g_{0.93}$C $a_{0.07}$)Ti $O_3$ ceramic sintered at 95$0^{\circ}C$ exhibits dielectric constants of 15~16, quality factor of 8000 and temperature coefficient of resonant frequency of -45 ppm/$^{\circ}C$ by adding 20 wt% alumine borosilicate glass.

(M $g_{0.93}$C $a_{0.07}$)Ti $O_3$마이크로파 유전체 세라믹스에 alumine borosilicate계 유리를 5~30wt% 첨가하여 저온소결 특성과 마이크로파 유전 특성을 조사하였다. (M $g_{0.93}$C $a_{0.07}$)Ti $O_3$에 alumine borosilicate계 유리를 첨가함으로서 소결온도를 135$0^{\circ}C$에서 95$0^{\circ}C$로 낮추었으며, 유리의 첨가량이 증가함에 따라 소결밀도의 증가 및 입성장이 뚜렷이 나타났고 20~30wt%의 유리가 첨가된 영역에서는 95%의 상대밀도를 갖는 소결체를 얻을 수 있었다. (M $g_{0.93}$C $a_{0.07}$)Ti $O_3$에 20wt%의 alumino boiosilicate계 유리를 첨가함으로서 95$0^{\circ}C$에서 유전율($\varepsilon$$_{r}$)은 15~16, 품질계수(Q$\times$f)는 8000이었으며, 이때 공진주파수의 온도 계수($ au$$_{cf}$ )는 -45 ppm/$^{\circ}C$을 나타내었다.

Keywords

References

  1. J. Am. Ceram. Soc. v.74 no.5 Ceramic and Glass-ceramic Packaging in the 1990s R. R. Tummala https://doi.org/10.1111/j.1151-2916.1991.tb04320.x
  2. J. Microelectronic & Packaging Soc. v.6 no.3 LTCC and LTCC-M Technologies for Multichip Module S. D. Park;H. G. Kang;Y. H. Park;J. D. Mun
  3. J. Am. Ceram. Soc. v.67 no.4 Microwave Characteristics of$(Zr, Sn)TiO_4$and$BaO-PbO-Nd_2O_3-TiO_2$Dielectric Resonators K. Wakino;K. Minai;H. Tamura
  4. J. Am. Ceram. Soc. v.77 no.9 Effect of Glass Additions on (Zr,Sn)TiO₄for Microwave Applications T. Takada;S. F. Wang;S. Yoshikawa;S-J. Jang;R. E. Newnham https://doi.org/10.1111/j.1151-2916.1994.tb04629.x
  5. J. Kor. Ceram. Soc. v.35 no.3 Effect of$B_2O_3$Addition on the Sintering Behavior and the Microwave Dielectric Properties of (Mg0.93Ca0.07) TiO₃Ceramics(in Kor.) D. W. Lee;J. H. Park;I. T. Kim;J. G. Park;Y. Kim;D. K. Choi
  6. J. Am. Ceram. Soc. v.83 no.11 Preparing Low-loss Low-temperature Cofired Ceramic Material without Glass Addition H. Jantunen;R. Rautioaho;A. Uusimaki;S. Leppavuori https://doi.org/10.1111/j.1151-2916.2000.tb01644.x
  7. J. Eur. Ceram. Soc. v.20 Compositions of$MgTiO_3-CaTiO_3$Ceramic with Two Borosilicate Glasses for LTCC Technology H. Jantunen;R. Rautioaho;A. Uusimaki;S. Leppavuori https://doi.org/10.1016/S0955-2219(00)00145-X
  8. Eur. J. Solid State Inorg. Chem. v.32 High Permittivity Microwave Ceramics D. Kolar;D. Suvorov
  9. J. Mater. Sci. v.17 Flux Sintered BaTiO₃Dielectrics I. Burn https://doi.org/10.1007/BF00752252
  10. Bull. Chem. Soc. Jpn v.56 Distribution of Calcium Ion in the Crystal of MgTiO₃-CaTiO₃System E. Nagata;J. Tanaka;M. Tsutumi;E. Bannai https://doi.org/10.1246/bcsj.56.3173
  11. IRE Trans v.MTT-8 A Dielectric Resonator Method of Measuring Inductive Capacities in the Milimeter Range B. W. Hakki;P. D. Coleman
  12. J. Kor. Ceram. Soc. v.34 no.8 Effect of Dopants on the Microwave Dielectric Properties of${(1-x)}MgTiO_{3-x}CaTiO_3$Ceramics(in Kor.) D. C. Woo;H. Y. Lee;J. H. Han;T. H. Kim;T. G. Choy