Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Test and Analysis of Thermal Ratcheting Deformation for 316L Stainless Steel Cylindrical Structure

316L 스테인리스강 원통 구조물의 열라체팅 변형 시험 및 해석

  • Published : 2002.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the progressive inelastic deformation, so called, thermal ratchet phenomenon which can occur in high temperature structures of liquid metal reactor was simulated with thermal ratchet structural test facility and 316L stainless steel test cylinder. The thermal ratchet deformation at the reactor baffle cylinder of the liquid metal reactor can occur due to the moving temperature distribution along the axial direction as the sodium free surface moves up and down under the cyclic heat-up and cool-down transients. The ratchet deformation was measured with the laser displacement sensor and LVDTs after cooling the structural specimen which is heated up to 55$0^{\circ}C$ with steep temperature gradients along the axial direction. The temperature distribution of the test cylinder along the axial direction was measured with 28 channels of thermocouples and was used for the ratchet analysis. The thermal ratchet deformation was analyzed with the constitutive equation of nonlinear combined hardening model which was implemented as ABAQUS user subroutine and the analysis results were compared with those of the test. Thermal ratchet load was applied 9 times and the residual displacement after 9 cycles of thermal load was measured to be 1.79mm. The ratcheting deformation shapes obtained by the analysis with the combined hardening model were in reasonable agreement with those of the structural tests.

Keywords

References

  1. KALIMER 예비 개념설계 보고서, 2000, KAERI/TR-1636, KAERI
  2. ASME Boiler and Pressure Vessel Code, 1998, Section III Subsection NH
  3. 이형연, 김종범, 유봉, 1998, '크리프_피로 하중하에서 손상을 받은 304 및 316LN 스테인리스강 구조물의 손상평가,' 대한기계학회논문집 A 권, 제 22권 제 12호, pp. 2269-2277
  4. 이형연, 김종범, 유봉, 2001, '액체금속로 고온배관의 미국 및 프랑스 설계지침을 따른 크리프_피로 손상평가,' 2001 년도 제 1 차 채료 및 파괴 부문 학술대회, 대한기계학회,pp. 178-184
  5. 고온구조 라체팅 시험장치 구축, 2000, KAERI/TR-1707/2000, 한국원자력연구소
  6. Bari., S, Hassan, T., 2001, 'Kinematic Hardening Rules in Uncoupled Modeling for Multiaxial Ratchteting Simulation,' International Journal of Plasticity, Vol.17, No.7, pp.885-905 https://doi.org/10.1016/S0749-6419(00)00031-0
  7. Igari, T.,Wada, H.,Ueta, M., 2000, 'Mechanism-based Evaluation of Thermal Ratcheting due to Traveling Temperature Distribution,' Journal of Pressure Vessel Technology, Vol. 122, No.2, p. 130 https://doi.org/10.1115/1.556162
  8. Wolters,J.,Breitbach,G.,Rodig,H.,Nickel,H.,1997, 'Investigation of Ratcheting Phenomenon for Dominating Bending Loads,' Nuclear Engineering Design, Vol. 174, No.3, pp. 353-363 https://doi.org/10.1016/S0029-5493(97)00128-3
  9. Ohshima, I., Tanaka, N., Hirayama, H., 1989, 'Structural Integrity of DFBR Internal Structure Under Severe Thermal Loading (2) : Thermal Ratchet Deformation,' ASME PVP. Vol. 163, pp. 47-55
  10. Lee H.Y., Kim J.B, Lee J.H and Yoo B, 1997, 'Prediction of Ratcheting Behavior of 304SS Cylindrical Shell Using Chaboche Model,' IAEA Technical Committee Meeting on Creep-Fatigue Damage Rules Used in Fast Reactor Design, IAEA-TECDOC-933, pp. 243-252
  11. 이형연, 김종범, 구경회, 2001, '316L 시험원통의 열라체팅 구조시험에 관한 연구,' 대한기계학회, 2001 춘계학술대회, pp. 178-184
  12. Lemaitre, J., Chaboche, J-L., 1990, Mechanics of Solid Materials, Cambridge university press
  13. Youn Samson, Lee Soon-Bok, Kim Jong Bum, Lee Hyeong-Yeon, Yoo Bong, 1998, 'Implementation of Visco-Plastic Constitutive Equations into the Finite Element Code ABAQUS,' Proceedings of the Korean Nuclear Society, 1998 추계학술대회, pp. 1-10
  14. 윤삼손, 이순복, 김종범, 이형연, 유봉, 2000, '상태변수를 갖는 비탄성 구성식 적분법의 일반화,' 대한기계학회논문집 A 권, 제 24 권 제 5 호, pp. 1075-1083
  15. RCC-MR Code, Section I, Subsection RB-3000, 1993, AFCEN, 1985 edition & 1993 addenda
  16. Wada,H., Otani,T., Fujioka,T., 1997, 'The Ratcheting Evaluation Methods in Japanese Demonstration FBR Design,' SMIRT 14, F04/2, p. 85-92
  17. ASME Boiler and Pressure Vessel Code, 1998, Section III NB, 1998 edition
  18. ABAQUS Users manual, Version 5.8, 2000, H.K.S.
  19. Schwertel, I., and Schinke, B., 1996, 'Automated Evaluation of Material Parameters of Viscoplastic Constitutive Equations,' J.Eng Mat. Tech., Vol. 118, p. 273 https://doi.org/10.1115/1.2806805
  20. IMSL Mathematics & Statistics Library, Vol. 2
  21. 열라체팅 변형의 해석정도 향상을 위한 비탄성 구성식의 개발, 일본전력중앙연구소, 1993, T93022, (일본어)
  22. O'Gara, D.M., 1996, 'Benchmark for Assessing Thermal Ratcheting,' Final Report, RA1-CT92-0209, AEAT, UK
  23. 이형연, 김종범, 이재한, 2001, '원통구조물의 열라체팅 변형기구 해석,' 한국원자력학회 2001 추계학술대회, pp. 1-11

Cited by

  1. Evaluation of Thermal Fatigue Lifetimes of Cast Iron Brake Disc Materials vol.36, pp.8, 2012, https://doi.org/10.3795/KSME-A.2012.36.8.835