DOI QR코드

DOI QR Code

J-integral of Penny-Shaped Crack on the End of Stiff Fiber Embedded in Rubbery Materials

고무와 섬유로 구성된 복합체 내의 섬유 끝 부분의 원형 균열에 대한 J-적분

  • Yang, Gyeong-Jin (Dept.of Mechanical Engineering, Graduate School of Chonnam National Universityisy) ;
  • Gang, Gi-Ju (Dept.of Mechanical Engineering, Chonnam National Universityisy)
  • 양경진 (전남대학교 대학원 기계공학과) ;
  • 강기주 (전남대학교 기계공학과)
  • Published : 2002.04.01

Abstract

An equation of J-integral for a penny-shaped crack at the end of the fiber embedded in rubber matrix is proposed. The values of J-integral for the specimens with various crack and specimen radius are obtained by FEA(Finite Element Analysis). The dimensional analysis is applied to derive an equation of J-integral as a nonlinear elastic energy release rate. The geometry and deformation calibration function in an equation of J can be expressed in a separated form. The geometry calibration function characterizing the effects of cord and specimen size is expressed in a polynomial form of fourth order. The deformation calibration function characterizes the effect of the overall level of strain. As approaching the infinitesimal strain, the value of the deformation calibration function approaches the results of LEFM(Linear Elastic Fracture Mechanics).

Keywords

References

  1. Breidenbach, R. F. and Lake, G. J., 1978, 'Mechanics of Fracture in Two-Ply Laminates,' Rubber Chemistry and Technology, Vol. 52, p. 96
  2. Ford, J. L., Patel, H. P. and Turner, J. L., 1982, 'Interlaminar Shear Effects in Cord-Rubber Composites,' Fibre Science and Technology, Vol. 17, p. 255 https://doi.org/10.1016/0015-0568(82)90021-5
  3. Kim, R. Y. and Soni, S. R., 1984, 'Experimental and Analytical Studies on the Onset of Delamination in Laminated Composites,' J. Composite Mat., Vol. 18, p. 70 https://doi.org/10.1177/002199838401800106
  4. Daniewicz, D. and Frantziskonis, G., 1992, 'Edge Delamination in Laminated Composites,' Composite Struct., Vol. 21, p. 141 https://doi.org/10.1016/0263-8223(92)90014-4
  5. Rivlin, R. S. and Thomas, A. G., 1953, 'Rupture of Rubber. I. Characteristic Energy for Tearing,' J. Polym. Sci., Vol. X, pp. 291-318 https://doi.org/10.1002/pol.1953.120100303
  6. Lake, G. J., 1994, 'Application of an Energetics Approach to Fatigue and Fracture in Elastomers,' To be Presented at a Meeting of the Rubber Division, ACS
  7. Gent, A. N., Lindley, P. B. and Thomas, A. G., 1964, 'Cut Growth and Fatigue of Rubbers. I. The Relationship Between Cut Growth and Fatigue,' J. Appl. Polym. Sci., Vol. 8, p. 455 https://doi.org/10.1002/app.1964.070080129
  8. Greensmith, H. W., 1963, 'Rupture of rubber. X. The Change in Stored Energy on Making a Small Cut in a Test Piece Held in Simple Extension,' J. Appl. Polym. Sci., Vol. 7, p. 993 https://doi.org/10.1002/app.1963.070070316
  9. Lake, G. J., 1970, 'Application of Fracture Mechanics to Failure in Rubber Articles with Particular Reference to Groove Cracking in Tyres,' Conf. Yield, Deformation and Fracture of Polymers
  10. Lindley, P. B., 1972, 'Energy for Crack Growth in Model Rubber Components,' J. Strain Analysis, Vol. 7, p. 132 https://doi.org/10.1243/03093247V072132
  11. Andrews, E. H., 1974, 'A Generalized Theory of Fracture Mechanics,' J. Mater. Sci., Vol. 9, pp. 887-894 https://doi.org/10.1007/BF00570380
  12. Ghfiri, H., Nait-Abdelaziz, M. and Mesmacque, G., 1993, 'Experimental Determination of J on Rubbery Materials: Influence of Finite Dimensions,' Eng. Fract. Mech., Vol. 44, No. 5, pp. 681-689 https://doi.org/10.1016/0013-7944(93)90197-Z
  13. Sharobeam, M. H. and Landes, J. D., 1991, 'The Load Separation Criterion and Methodology in Ductile Fracture Mechanics,' Int. J. Fract., Vol. 47 pp. 91-104 https://doi.org/10.1007/BF00032571
  14. Huang, Y. S. and Yeoh, O. H., 1989, 'Crack Initiation and Propagation in Model Cord-Rubber Composites,' Rubber Chemistry and Technology, Vol. 62, p. 709 https://doi.org/10.5254/1.3536270
  15. Hocine, N. A., Abdelaziz, M. N., Ghfiri, H. and Mesmacque, G., 1996, 'Evaluation of the Energy Parameter J on Rubber-Like Materials: Comparison between Experimental and Numerical Results,' Eng. Fract. Mech., Vol. 55, No. 6, pp. 919-933 https://doi.org/10.1016/S0013-7944(96)00046-X
  16. Sack, R. A., 1946, Proc. Phys. Soc., London Vol. 58, p. 729 https://doi.org/10.1088/0959-5309/58/6/312