Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

An Optimum Design of Replication Process to Improve Birefringence, Radial-Tilt and Land-Groove Structure in DVD-RAM Substrates

DVD-RAM 기판의 복굴절, Radial-Tilt 및 전사성 향상을 위한 사출압축성형공정 최적화

  • 강신일 (연세대학교 기계전자공학부) ;
  • 성기병 (연세대학교 대학원 기계공학과) ;
  • 이남석 (연세대학교 대학원 정보저장공학과)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this study is to provide a simple methodology to find optimum processing conditions to fabricate sub-micron structured DVD-RAM substrates with superb optical and geometrical properties. It was fecund that the birefringence, which is regarded as one of the most important optical properties for an optical disk, was very sensitive to the mold wall temperature history. Also, the integrity of the replication, represented by the land-groove structure and the radial tilt were influenced by the mold temperature and the compression pressure. A set of optimum conditions were obtained by applying Design of Experiment and the objective functions composed of three different objectives.

Keywords

References

  1. Gerber, R. E. and Mansuripur, M., 1995, 'Effects of Substrate Birefringence and Tilt on the Irradiance and Phase Patterns of the Return Beam in Magneto-optical Disk Storage,' Applied Optics, 34(22), pp. 4780-4787 https://doi.org/10.1364/AO.34.004780
  2. Shyu G. and Isayev A., 1995, 'Residual Stresses and Birefringence in Injection Molded Disks,' SPE ANTEC Tech. Papers, 41, pp. 2973-2977
  3. Kang, S., Kim, J. and Kim, H., 2000, 'On the Birefringence Distribution in Magneto-Optical Disk Substrates Fabricated by Injection-Compression molding,' Optical Engineering, 39(03). pp. 689-694 https://doi.org/10.1117/1.602415
  4. Kang, S., Hieber, C. A. and Wang, K. K., 1998, 'Optimum Design of Process Conditions to Minimize Residual Stresses in Injection-molded Parts,' Journal of Thermal Stresses, 21, pp. 141-155 https://doi.org/10.1080/01495739808956140
  5. Miyagawa, N., Gotoh, Y., Ohno, E., Nishiuchi, K. and Akahira, N., 1993, 'Land and Groove Recording for High Track Density on Phase Change Optical Disk,' Jpn. J. Appl. Phys, 32(11B), pp. 5324-5328 https://doi.org/10.1143/JJAP.32.5324
  6. Satoh, I., Ohara, S., Akahira, N. and Takenaga, M., 1998, 'Key technology for high dens ity rewritable DVD(DVD-RAM),' IEEE Transaction of Magnetics, 34, pp. 337-342 https://doi.org/10.1109/20.667758
  7. Walpole, E. and Myers, H., 1993, Probability and Statistics for Engineers and Scientists, Macmillan Pub, 5th Ed., pp. 235-462
  8. Santhanam, N. and Wang, K. K., 1990, 'A Theoretical and Experimental Investigation of Warpage in Injection Molding,' SPE ANTEC Technical Papers. 36, pp. 270-273
  9. Kuehl, R. O., 2000, Design of Experiments: Statistical Principles of Research Design and Analysis, Duxbury Press
  10. Jansen, K. M. B., 1995, 'Heat Transfer in Injection Molding Systems with Insulation Layer and Heating Elements,' Int. J. Hear Mass Transfer, 38(2), pp. 309-316 https://doi.org/10.1016/0017-9310(95)90021-7