Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation on the Characteristics of Stress Corrosion Cracking for the Weldment of HT-60 Steel under Applied Potentials

인가전위 하에서 HT-60강 용접부의 SCC특성 평가

  • Na, Ui-Gyun (Faculty of Mechanical Engineering, Kunsan National University)
  • 나의균 (군산대학교 기계공학부)
  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The susceptibility of SCC for the weldment and PWHT specimens of HT-60 steel was evaluated using a slow strain rate method under applied potential by means of the potentiostat in synthetic seawater. In case of the parent, anodic polarization voltage was inappropriate in elongating the time to failure(TTF). -0.8V corresponding to cathodic protection range is most effective in improving the SCC resistance against corrosive environment. In case of the weldment, the values of reduction of area(ROA) and TTF at -0.68V corresponding to cathodic polarization value were 45.2% and 715,809sec which were the largest and longest life among other applied potentials. Those were vise versa at -1.1V. In case of the PWHT specimens, TTF and ROA at -0.68V was longest and largest like the weldment. Besides, PWHT is effective in prolonging the time to failure of the welded off-shore structure due to softening of effect. Regardless of the weldment and PWHT specimen, as corrosion rate gets higher, TTF becomes shorter and deformation behaviour for the weldment and PWHT specimen at -1.1V was shown to be irregular. Finally, it was found that specimens showed brittle fracture at -1.1V, but more ductile fracture accompanying the micro-cracks at applied potential of -0.68V.

Keywords

References

  1. 이재익, 1988, 'plant설비의 손상경향에 대하여,' 한국부식학회지, 제 17권, 제 3호, pp. 172-181
  2. 大西, 1983, 金屬の腐蝕損傷と防蝕技術, p. 178
  3. Fimegan, J. E. and Hartt, W. H., 1976, 'Stress Intensity Factor Dependence of Stress Corrosion Crack Growth Rate in 7079-T651 Aluminum,' ASTM STP 610, pp. 44-59
  4. Gough, H. J., 1932, Corrosion Fatigue of Metals, J. Inst, Metals, p. 49
  5. Pao, P. S. and Wei, P. R., 1976, ' In Environmental-sensitive Fracture of Engineering Materials,' TMS-AIME, Warrendale, pp. 565-580
  6. Gooch, T. G., 1974, Welding J. 53, p. 287
  7. Knight, J. W., 1977, ' Welding Research International,' Vol. 7, No. 5, pp. 385-411
  8. Na, Eui-Gyun, Koh, Seung-Ki Koh and Oh , Seok-Hyung, 2000,' Study on Corrosion Characteristics and Stress Corrosion Cracking of the Weldment for HT-60 Steel in Synthetic Seawater,' KSME International Journal, Vol. 14, No. 2, pp. 152-158
  9. 조정운, 1990, ' 강 용접부의 응력부식크랙 감수성평가에 관한 연구,' 전북대학교 대학원 석사학위논문
  10. 손운택, 1980, 금속부식학, p. 20
  11. Hinton, B. R. and Procter, R. P., 1983, ' The Effect of Strain Rate and Cathodic Potential on the Tensile Ductility of X-65 Pipelines Steel,' Corrosion Science, Vol. 23, No. 2, pp. 101-123 https://doi.org/10.1016/0010-938X(83)90110-5
  12. Mark Wilhelm, S. and Kane, R. D., 1984, ' Effect of Heat Treatment and Microstructure on the Corrosion and SCC of Duplex Stainless Steels in H2S/Cl- Environments,' The Journal of Science and Engineering, Vol. 40, No. 8, pp. 431-439
  13. 이동욱, 1999, ' 음극방식 하에서 HT-60강 용접부의 응력부식균열 감수성평가에 관한 연구,' 군산대학교 석사학위논문
  14. 정세희, 박창언, 1986.' 강 용접열영향부의 소성변형거동에 관한 연구,' 대한기계학회 춘계학술대회초록집, pp. 29-34