DOI QR코드

DOI QR Code

플라즈마 질탄화처리된 SCM435강의 미세조직에 미치는 가스 조성의 영향

Influence of Ambient Gas Composition on the Microstructure of Plasma Nitrocarburised SCM435 steel

  • Lee, In-Seop (Depatment of Advanced Materials Engineering, Engineering Dong-Eui University)
  • 발행 : 2002.06.01

초록

Plasma nitrocarburizing treatment was performed for SCM 435 steel by using a plasma ion nitriding system. The effects of the variation of nitrogen and methan contents upon the hardened layer was investigated. Both the thickness of the compound layer and the amount of $\varepsilon$ phase in the compound layer increased with increasing nitrogen content. However, the thickness of the compound layer decreased due to unstable plasma for an atmosphere containing 90% $N_2$ gas content in the gas mixture. The amount of $\varepsilon$phase in the compound layer increased with increasing $CH_4$ gas content. For $CH_4$ gas content more than 2% in the gas mixture, the thickness of the compound layer decreased due to the formation of $\theta$ phase.

키워드

참고문헌

  1. T. Bell, Survey of heal treatment of engineering component, The Metals Society, London (1976)
  2. P. Astley, Heat Treatment of Metals 2, 51 (1975)
  3. B. Harumann, T. Bell, and Y. Sun, Surf. Eng., 8, 275 (1992) https://doi.org/10.1179/sur.1992.8.4.275
  4. L. Wang and X. Xu, Surf. coat. Tech. 126, 288 (2000) https://doi.org/10.1016/S0257-8972(00)00547-8
  5. T. Bell, Y. Sun, and A. Suhadi, Vacuum, 59,14 (2000) https://doi.org/10.1016/S0042-207X(00)00250-5
  6. C. Ruset, A. Bloyce and T. Bell, Heat Treatment of Metals 4, 95 (1995)
  7. E. Huchel, and S. Dressier, Proc. Int Heat Treating Conf. Ilinois, (1994) 143
  8. T. Bell, and S. Y. Lee, Heat Treatment '73, The metals Society, London 99 (1973)
  9. C. Dawes, and D.F. Tranter, Heat Treatmet of Metals, 12,70 (1985)
  10. S. Hoppe, Surf. Coat. Tech. 98,1199 (1998) https://doi.org/10.1016/S0257-8972(97)00548-3
  11. L. Pettijean et al: 4th Int. Colloquiem on Plasma and Ca-thodic Sputtering, Nice, (1982) 25