DOI QR코드

DOI QR Code

FPGA Design of LCD Drive Circuit using USB Interface

USB 인터페이스를 이용한 LCD 구동회로의 FPGA 설계

  • Published : 2002.03.01

Abstract

This paper describes a Gray Mode Graphic STN LCD drive circuit using USB interface. The drive circuit using USB interface can highly transfer image data created under PC t LCD. Hence, the LCD drive circuit doesn't use microprocessor for the convenience of users. The proposed LCD drive circuit part have been verified by simulation and by ALTERA EPF10K10TC144-3 FPGA implementation in VHDL. The USB interface part have been programmed in MS-Visual C++ 6.0. The validity and efficiency of the proposed LCD drive circuit have been verified by test board. After comparing this LCD drive circuit to specify it was verified that the developed LCD drive circuit showed good performances, such as convenience of users, low cost.

본 논문에서는 USB(Universal Serial Bus) 인터페이스를 이용하여 Gray Mode Graphic STN LCD를 구동하는 구동회로를 제안한다. 제안된 구동회로는 사용자가 PC상에서 작업한 이미지 데이터를 USB 인터페이스를 이용하여 LCD로 전송할 수가 있다. 따라서 기존의 방식과는 달리 마이크로프로세서를 사용하지 않기 때문에 사용자가 손쉽게 LCD를 구동할 수 있는 장점이 있다. 제안한 LCD 구동회로 부분은 VHDL(VHSIC Hardware Description Language)로 설계하여 시뮬레이션을 수행하고 ALTERA사의 EPF10K10TC144-3 FPGA를 사용하여 구현하였다. USB 인터페이스 부분은 MS-Visual C++ 6.0으로 프로그래밍하였다. 한편, 제안한 구동회로를 테스트 보드를 구성한 후에 하드웨어 동작 검증을 수행하여 그 효용성을 입증하였다. 본 논문에서 제안한 구동회로를 현재 시판중인 마이크로프로세서를 사용하는 타 업체의 구동회로와 비교한 결과는 구동회로의 작동 편이성, 제작시 소요되는 비용 등에서 우수함을 나타내었다.

Keywords

References

  1. 이승우, 'STN 액정표시소자의 기술과 전망', 대한전자공학회지, 제22권 제3호, pp.82-91, 1995
  2. 이채우, '전자 DISPLAY 기술동향', 대한전자공학회지, 제22권 제3호, pp.23-30, 1995
  3. 장진, '박막트랜지스터 액정디스플레이', 대한전자공학회지, 제26권 제2호, pp.44-61, 1999
  4. De Rycke I. ; Van Calster, A. ; VanFleteren, J. ; De Baets, J. ; Doutreloigne, J. ; De Smet, H. ; Vetter, P., '2-MHz clocked LCD drivers on glass,' Solid-State Circuits, IEEE Journal of, Volume : 25 Issue : 2, pp.531-538, April, 1990 https://doi.org/10.1109/4.52181
  5. Valencic, V. ; Ballan, H. ; Deval, P. ; Hochet, B. ; Declercq, M., '50-V LCD driver integrated in standard 5-V CMOS process Custom Integrated Circuits Conference,' 1994., Proceedings of the IEEE 1994, pp.578-581, 1994 https://doi.org/10.1109/CICC.1994.379655
  6. 권오경, 'Flat Panel Display를 위한 구동방식 및 구동회로', 전자공학회지, 제22권 제3호, pp.92-105, 1995
  7. 김준배, 정병후, 배병성, 한민구, 권오경, 'Cycling Shift Register를 이용한 새로운 LCD 구동회로의 설계', 대한전자공학회 추계종합학술대회논문집(B), 제19권 제2호, pp.841-844, 1996
  8. 이수범, 남상길, 조경연, 김종진, '광시각용 LED 정광판 제어시스템 설계', 한국정보처리학회논문지, 제6권 제5호, pp.1351-1361, 1999
  9. MSM6255 DOT MATRIX LCD CONTROLLER, OKI semiconductor Data Sheet
  10. SL11R Hardware SpecificationTechnical Reference, Scan Logic Corporation Datasheet
  11. 전세일, 이두복, 'USB 인터페이스를 이용한 테이터 전송프로그램 개발'. 한국정보처리학회논문지, 제7권 제5호, pp.1553-1558, 2000
  12. Specifications for Approval(UG-24D01-GEBT5-E), SAMSUNG DISPLAY DEVICES CO.,LTD