Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Improvement Position Error induced Thermal Deformation of CNC Lathe Using Touch Sensor

접촉 센서를 이용한 CNC 선반 열변형에 따른 위치오차 개선에 관한 연구

  • 홍성오 (화천기공(주) 기술개발연구소)
  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Development of high speed feed drive system has been a major issue for the past few decades in machine tool industries. The reduction of the tool change time as well as rapid travel time can enhance the productivity. However, the high speed feed drive system generates more heat in nature, which leads thermal expansion that has adverse effects on the accuracy of machined parts. The detail of the model proposed is described in the paper together with the experimental methodologies using a proposed compact measurement system to examine the validity of the proposed approach. The results showed the machining accuracy could be maintained to better than $\pm$ 5$\mu\textrm{m}$ while using this sensor.

Keywords

References

  1. Selection of Temperature Control Methods Suitable for Lathes and Machining Centers with Different Thermal Characteristics v.53 no.4 Study on Temperature Control of Machine Tools(4th Report) Junji Chigira;Yoshiaki Kakino
  2. Rapid Stabilization of a Machine Tool before Working v.41 no.6 Control of the Thermal Deformation of a Machine Tool(1st Report) Toshio Sata;Yoshimi Takeuchi
  3. Control on Varying Heat source v.41 no.11 Control of the Thermal Deformation of a Machine Tool(2nd Report) Yoshimi Takeuchi;Nobuyuki Okubo;Toshio Sata
  4. Effects of the Circulation of Fluids v.39 no.2 Thermal Deformation of Machine Tools(3st Report) Keiji Okushima;Yoshiaki Kakino
  5. In Case of Constant Preload v.50 no.4 A Study of Thermal Expansion of Ball Screw Jiro Otsuka;Shigeo Fukada
  6. Thermal Deformation of Colum in Steady state v.38 no.3 Thermal Deformation of Machine Tools(1st Report) Keiji Okushima;Yoshiaki Kakino
  7. NC Machine Tools JSPE v.54 no.9 A Study of Compensation of Thermal Dispiacement of the Ballscrew Yoshiaki Kakino;Kazuaki Mori
  8. Automatic Compensation Using an NC Controller Marketed v.57 no.6 A Method of Thermal Displacement Compensation for Machining Center by Temperatures Measured on the Machine(2nd Report) Mitsuyasu Matsuo;Takeshi Yasui
  9. NSK Technical Journal no.650 Influence of Ball screws and Slide ways on Positioning Accuracy Yamaguchi
  10. FANUC series O-Mate for Lathe Operator's Manual
  11. 한국공작기계학회지 v.8 CNC 선반에서 볼나사 열변형에 따른 위치결정 정도 개선에 관한 연구 홍성오;조규재;김재열