Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Design of Rubber Mount for Anti-vibration of an Optical Disk Drive Considering the Dimensional Tolerance

치수공차가 고려된 광디스크 드라이브의 방진마운트 설계에 관한 연구

  • 김국원 (순천향대학교 기계공학과) ;
  • 김남웅 (LG전자 디지털 미디어(연))
  • Published : 2002.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

With the increase of storage density, high rotational speed and high access technologies in optical disk drive, mechanical issues, mainly noise and vibration, become critical. Up to now the researches of rubber mount for anti-vibration focused on how to calculate the static and the dynamic stiffness of rubber mount and loaned out consideration of the dimensional tolerance of rubber mount for anti-vibration. This paper presents the effects of dimensional tolerance of rubber mount for anti-nitration on the dynamic characteristics of optical disk drive by finite element analysis and dynamic test. The relation between dimensional tolerance and dynamic characteristics of optical disk drive is observed and discussed.

Keywords

References

  1. 김국원, 임종락, 한용희, 손희기, 안태길, 1998, "압축하중을 받는 방진고무의 동특성 해석 및 실험", 한국소음진동공학회지, 제 8 권 제 5 호, pp. 900-907.
  2. 김남웅, 김국원, 홍구, 정문채, 김외열, 1999, "슬림형 광 디스크 드라이브의 방진설계", 한국소음진동공학회지, 제 9 권 제 2 호, pp. 324-330.
  3. 김국원, 임종락, 손희기, 안태길, 1999, "압축된 고무재료의 정적 변형 해석과 동특성 예측", 한국소음진동공학회지, 제 9 권 제 3 호, pp. 472-476.
  4. 김국원, 임종락, 안태길, 1999, "압축된 방진고무의 강성 해석", 한국정밀공학회지, 제 16 권 제 6 호, pp. 141-147.
  5. MARC, 1997, "Analysis of Non-linear Material Behaviour Using the MARC Finite Element Program", MARC Analysis Research Corporation.
  6. Gent, A. N., 1958, "On the Relation Between Indentation Hardness and Young’s Modulus," Rubber Chemistry and Technology, Vol. 31, pp. 896-906. https://doi.org/10.5254/1.3542351