왁스와 오일 또는 흑연의 함침에 의한 나일론의 마찰특성 향상에 관한 연구

A Study on the Improvement of Frictional Properties of Nylon Impregnated with Wax and Oil or Graphite

  • 발행 : 2002.11.01

초록

The frictional properties of nylon can be improved by the impregnation of lubricants like wax, oil or graphite. The inclusion of these lubricants, on the other hand, decreases the mechanical properties of nylon, such as tensile strength, hardness and impact strength. As an attempt to maximize frictional properties, while minimizing a decrease in the mechanical properties, various kinds of nylon containing 3 wt% wax and varying contents of oil or graphite were prepared. It was found that the synergy effects to improve both friction and anti-wear properties is evidenced by impregnating a combination of wax/oil or wax/graphite. The wear rate of a nylon containing 3 wt% of wax and 1.5 wt% of oil turned out to be 1/4 of that of nylon impregnated with 8 wt% wax or 8 wt% oil. The latter showed the lowest wear rate among the nylons prepared with a single lubricant. In addition, the friction coefficient of the developed nylon was found to be very similar to the nylon with 8 wt% wax only.

키워드

참고문헌

  1. Nylon Plastics Handbook M.I.Kohan
  2. J. Polym. Sci. v.48 Mechanism and Kinetics of Adiabatic Anonic Polymerization of Caprolactam in the Presence of Various Activators G.Champetire;H.Sekiguchi
  3. Comprehensive Polymer Science v.3 J.Sebenda
  4. Eur. Polym. J. v.18 no.6 Anionic Polymerization of Caprolactam J.Stehlicek;J.Sebenda
  5. Macromol. Chem. v.193 no.10 Anionic Polymerization of 6-Hexanelactam J.Stehlicek;R.Puffr
  6. Polym. J. v.28 no.5 Synthesis of High Molecular Weight Nylon 6 by Anionic Polymerization of Caprolactam K.Ueda;K.Yamada;M.Nakai;T.Matsuda;M.Hosoda;K.Tai
  7. Polymer(Korea) v.24 no.1 Effect of the Amount of Catalyst and Chain-initiator on the Anoinic Polymerization D.W.Chung;Y.T.Oh;Y.T.Park
  8. Polymer(Korea) v.23 no.3 Synthesis and Mechanical Properties of Nylon 6 Block Copolymer via Anionic Polymerization B.C.Chun;D.W.Chung
  9. J. Korean Ind. & Eng. Chemistry v.9 no.5 Synthesis and Friction Properties of Oil-impregnated Nylon 6 D.W.Chung;S.C.Kang
  10. Wear v.239 The Synthesis and Frictional Properties of Lubricant-impregnated Cast Nylons S.C.Kang;D.W.Chung
  11. J. Korean Ind. & Eng. Chemistry v.11 no.2 The Synthesis on the Electrically Conductive Properties of Graphitenylon 6 Composite D.W.Chung;Y.T.Park
  12. J. KSLE v.2 no.1 The Effect of the Preformed Oil or Oxide Film on the Lubricated Sliding Surface S.C.Kang
  13. J. Polym. Sci. Polym. Phys. v.37 Reduced Percolation Thresholds of Immiscible Conductive Blends S.H.Foulger