Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Microstructural Evolution during the Equal Channel Angular Pressing of Ti-6Al-4V Alloy

Ti-6AI-4V 합금의 ECAP 가공에 따른 미세조직의 변화

  • 고영건 (포항공과대학교 신소재공학과) ;
  • 정원식 (한양대학교 금속재료공학과) ;
  • 신동혁 (한양대학교 금속재료공학과) ;
  • 이종수 (포항공과대학교 신소재공학과)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The microstructural evolution during the equal channel angular pressing of Ti-6Al-4V alloy was investigated using the transmission electron microscopy (TEM). ECA pressing was carried out isothermally with route C at $600^{\circ}C$ for two types of initial microstructure, i.e., equiaxed and Widmanstatten microstructures. At an initial stage of ECA pressing, the equiaxed microstructure showed more uniform flow than the Widmanstatten microstructure. However, both microstructures were significantly refined revealing nearly equiaxed grains of 0.3$mu extrm{m}$ in diameter with high angle grain boundaries after 4 passes of ECA pressing. These ultrafine gains were found to be stable with little grain growth, when annealed up to $600^{\circ}C$ for 1hr.

Keywords

References

  1. Valiev, R. Z., Islamgaliev, R. K. and Alexandrov, I. V, 2000, Prog. Mater. Sci., vol.45, p, 103-189. https://doi.org/10.1016/S0079-6425(99)00007-9
  2. Segal, V. M., Reznikov, V. I., Drobyshevskiy, A. E. and Kopylov, V. I., 1981, Russian Metall., vol.1, p.99.
  3. Sevillano, G., Houtte, V., and Aernoudt, E. 1980, Prog. Mater. Sci., vol.25, pp. 69-412. https://doi.org/10.1016/0079-6425(80)90001-8
  4. Jones, H, 1994, Key Eng. Mater., vol.97, p.1. https://doi.org/10.4028/www.scientific.net/KEM.97-98.1
  5. Koch, C. C. and Cho, Y. S., 1992, Nanostruct. Mater., vol1, pp. 207-212. https://doi.org/10.1016/0965-9773(92)90096-G
  6. Ferrasse, S., Segal, V. M, Hartwig, K. T. and Goforth, R. E., 1997, Metall. Mater. Trans., vol. A28, pp. 1047-1057.
  7. Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T. G., 1998, Acta Mater., vol.46, pp.3317-3331. https://doi.org/10.1016/S1359-6454(97)00494-1
  8. Segal, V. M., 1995, Mater. Sci. Eng., vol.A197, pp.157-164
  9. Mabuchi, M., Iwasaki, H., Yanase, K., and Higashi, K., 1997, Scripta Mater., vol.36, pp.681-686. https://doi.org/10.1016/S1359-6462(96)00444-7
  10. Valiev, R. Z., Ivanisenko, Y. V., Rauch, E. F. and Baudelet, B., 1996, Acta Mater., vol.44, pp.4705-4712. https://doi.org/10.1016/S1359-6454(96)00156-5
  11. Shin, D. H, Kim, B. C, Kim, Y. S. and Park, K T, 2000, Acta Mater., vol.48, pp. 2247-2255. https://doi.org/10.1016/S1359-6454(00)00028-8
  12. Kim, I., Jeong, W. S., Kim, J., Part, K. T. and Shin, D. H., 2001, Scripta Mater., vol.45, pp. 575-580. https://doi.org/10.1016/S1359-6462(01)01065-X
  13. Stolyarov, V. V., Zhu, Y. T., Alexandrov, I. V., Lowe, T. C.and Validv, R. Z., 2001, Mater. Sci. Eng., vol.A299, pp. 59-67.
  14. DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 1391-1402.
  15. DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 2473-2481.
  16. 고영건, 정원식, 신동혁, 이종수, 2002, 한국소성가공학회 2002년도 춘계학술대회 논문집, pp. 177-180.
  17. Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T. G., 1997, Acta Mater., vol.45, pp.4733-4741. https://doi.org/10.1016/S1359-6454(97)00100-6
  18. Semiatin, S. L. and DeLo, D. P.. 2000, Materials and Design, vol.21, pp. 311-322. https://doi.org/10.1016/S0261-3069(99)00085-0
  19. Nadai, A, 1950, Theory of Flow and Fracture of Solids, 1, McGraw-Hill, NewYork, Ch.23.
  20. Semiatin, S. L. and Bieler, T. R., 2001, Acta Mater., vol.49, pp. 3565-3573. https://doi.org/10.1016/S1359-6454(01)00236-1
  21. DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 1425-1435.
  22. Semiatin, S. L. and Jonas, J. J., 1984, Formability and Workability of Metals, ASM, Metals Park, OH.
  23. Yamaguchi, D., Horita, Z., Nemoto, M. and Langdon, T. G., 1999, Scripta Mater., vol.41, pp. 791-796. https://doi.org/10.1016/S1359-6462(99)00233-X
  24. Shin, D. H., Kim, I., Kim, J. and Park, K. T., 2001, Acta Mater., vol.48, pp. 1285-1292.
  25. Partridge P. G., 1968, The Crystallography and Deformation Mode of HCP Metals, Met. Rev., vol.118, p. 169
  26. Mishra, R. S., Stolyarov, V. V., Echer, C., Valiev, R. Z. and Mukherjee, A. K., 2001, Mater. Sci. Eng., vol.A298. pp. 44-50.