PMSM Sensorless Operation for High Variable Speed Compressor

고속압축기 구동 PMSM을 위한 센서리스 운전

  • Published : 2002.12.01

Abstract

This paper presents the implementation and experimental investigation of sensorless speed control for a variable-speed PMSM(Permanent Magnet Synchronous Motor) in super-high speed compressor operation. The proposed control scheme consists of two different sensorless algorithms to guarantee the reliable starting operation in low speed region and full torque characteristics using the vector control in high speed region. An automatic switching technique between two control modes is proposed to minimize the speed and torque pulsation during the switching instant of control mode. A testing system of 3.3㎾ PMSM has been built and 90% load test results at 7000r/min are presented to examine the feasibility of proposed sensorless control scheme.

Keywords

References

  1. W. L. Soong. G. B. Kliman, R. L. Johnson, R. A. White, and J. E. Miller, 'Novel High-Speed Induction Motor for a Commercial Centrifugal Compressor,' IEEE Trans. on Industry Applications, Vol. 36, No. 3, pp. 706-713, May/June, 2000 https://doi.org/10.1109/28.845043
  2. Longya Xu and Changjiang Wang, 'Implementation and Experimental Invetigation of Sensorless Control Schemes for PMSM in Super-high Variable Speed Operation,' IEEE-IAS Conf. Record, pp. 483-489, 1998 https://doi.org/10.1109/IAS.1998.732349
  3. Bon-Ho Bae. Seung-Ki Sul, Jeong-Hyeck Kwon and Jong-Sub Shin,'Implementation of Sensorless Vector Control for Super-High PMSM of Turbo-compressor,' IEEE-IAS Conf. Record, pp. 1203-1209, 2001 https://doi.org/10.1109/IAS.2001.955650
  4. M. Hippner and R. G. Harley, 'Looking for an Optimal Rotor for Hihg Speed Permanent Magnet Synchronous Machine,' IEEE-IAS Conf. Record, pp. 265-270, 1992
  5. K. Iizuka, H. Uzuhashi, M. Kano, T. Endo and K. Mohri, 'Microcomputer Control for Sensorless Brushless Motor.' IEEE Trans. on Industry Applications, Vol. IA-21, No. 4, pp. 595-601, May/June, 1985 https://doi.org/10.1109/TIA.1985.349715
  6. T. Ohtani, N. Tanaka and K. Tanak, 'Vector Control of Induction Motor without Shaft Encoder,' IEEE Trans. on Industry Applications, Vol. 28, No. 1, pp. 157-164, Jan./Feb., 1992 https://doi.org/10.1109/28.120225
  7. A. Consoli, S. Musumeci, A. Raciti and A. Testa, 'Sensorless Vector Control and Speed Control of Brushless Motor Drives,' IEEE Trans. on Industrial Electronics, Vol. 41, No. 1, pp. 91-96, Feb., 1994 https://doi.org/10.1109/41.281613
  8. P. L. Jansen and R. D. Lorenz, 'Transducerless Position and Velocity Estimation in Induction and Salient AC Machines,' IEEE Trans. on Industry Applications, Vol. 31, No. 2, pp. 240-247, March/April, 1995 https://doi.org/10.1109/28.370269
  9. 하정익, '고주파 신호 주입을 이용한 속도 및 위치 검출기가 없는 교류 전동기의 제어,' 서울대학교 전기.컴퓨터 공학부 박사학위 논문, 2001.2
  10. 김준석, '속도 및 위치 검출기가 없는 영구자석 동기전동기의 고성능 운전,' 서울대학교 전기공학과 박사학위 논문, 1995.8