Abstract
In this paper, a microstrip patch array antenna for a Doppler radar at 10.525GHz is desinged and fabricated. To be used for mobile radar system, the antenna is fabricated on a single layer laminate to resist a fire impact and is covered with the Teflon foam. To obtain the desired characteristics, the array antenna is designed 4$\times$8 array using a corporate 3-dB amplitude taper. Also, using square patch elements, the antenna can be converted to a circular polarized antenna later. The designed and fabricated array antenna has the reflection coefficient$({S_11})$ -53.498dB, the horizontal beam width of $10^{\circ}$, the vertical beam width of $18.8^{\circ}$, the gain of 21dBi, the bandwidth of 220MHz for VSWR<1.5 and a side lobe level of less than -17.5dB.
본 논문에서는 이동 목표물의 속도를 측정하기 위한 도플러 레이더용 중심 주파수 10.525GHz인 마이크 로스트립 패치 배열 안테나를 설계 및 제작하였다. 이동용 레이더 시스템에 적용하기 위해서 비교적 충격에 강한 단일기판을 사용하였고, 원하는 특성을 얻기 위하여 급전회로망은 corporated 3-dB amplitude taper를 이용하여 4 $\times$ 8로 배열하였다. 또한 정사각형의 패치 소자를 사용하여 원편파를 이용할 수 있도록 하였다. 설계 및 제작된 안테나는 반사계수(S$_1$$_1$) -53.498dB, 수평 빔폭 $10^{\circ}$, 수직 빔폭 $18.8^{\circ}$, 이득 21dBi 및 SLL(Side Lobe Level) -17.5 dB 이하, 220MHz의 VSMR 1.5 이하 대역폭을 얻었다.