DOI QR코드

DOI QR Code

유동성 레진이 치은 상아질 변연 누출에 미치는 영향

Influence of flowable composite lining on microleakage at the gingival dentin margin

  • 이정민 (경북대학교 치과대학 치의학과 보존학교실) ;
  • 김영경 (경북대학교 치과대학 치의학과 보존학교실) ;
  • 박정원 (경북대학교 치과대학 치의학과 보존학교실)
  • Lee, Jung-Min (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University) ;
  • Kim, Young-Kyung (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University) ;
  • Park, Jeong-Won (Department of Conservative Dentistry, School of Dentistry, Kyungpook National University)
  • 발행 : 2002.07.01

초록

2급 복합레진 수복 와동의 치은 변연이 상아질 상에 있을 때 유동성 레진 이장의 유무와 두께가 미세누출에 미치는 영향을 알아보기 위해 본 실험을 시행하였다. 60개의 발거된 대구치의 근, 원심면에 각각 협설측 3mm, 치은벽 깊이 1mm의 2급 와동을 형성하고 치은 변연은 법랑-백아 경계에서 약 1mm 하방에 위치 시켰다. 모든 와동을 32% 인산으로 15초 처리 및 30초 수세 후 Prime & Bond$^{\circledR}$ NT 상아질 접착제를 적용하였고, Tetric Ceram(TC), Tetric Flow(TF)를 이용하여 다음의 6가지 군으로 나누어 수복하였다. (1) TC로 수평 적층 충전, (2) TC로 수직 적층 충전, (3) 0.5-1mm두께로 TF 이장 후 TC로 수평적층 충전, (4) 0.5-1mm 두께로 TF 이장 후 TC로 수직 적층 충전, (5) 2-3mm 두께로 TF 이장 후 TC로 수평적층 충전, (6) 2-3mm두께로 TF이장 후 TC로 수직 적층 충전. 충전된 시편을 37$^{\circ}C$ 100% humidity에서 24시간 보관하고 5$^{\circ}C$와 55$^{\circ}C$에서 500회의 열순환을 실시하여 치은 변연의 0.5mm 외부에 nail varnish를 도포 하여 2% methylene blue 용액에 12시간 침잠시켰다. 시편을 아크릴릭 레진에 매몰하여 수복물의 중앙에서 종절단 한 후 입체현미경하에서 색소의 침투도를 관찰하여 다음과 같은 결과를 얻었다. 유동성 레진의 이장을 시행한 군과 하지 않은 군간에 미세누출은 유의차를 보이지 않았다(p>0.05) 유동성 레진의 두께에 따른 미세누출의 차이는 나타나지 않았다(p>0.05) 경사면 충전법을 시행한 군에서는 유동성 레진을 이장한 군들이 이장하지 않은 군보다 유의하게 많은 누출을 보였다(p<0.05). 수평적층 충전법을 시행한 군에서는 유동성 레진 이장이 미세누출에 유의한 차이를 보이지 않았다(p>0.05).

키워드

참고문헌

  1. Hansen, E. K. : Contraction pattern of composite resins in dentin cavities. Scand. J. Dent. Res., 90:480-483. 1982
  2. De Gee. A. J., Davidson. C. L. and Smith, A. A. :Modified dilatometer of continuous recording of volumetric polymerization shrinkage of composite restorative materials, J. Dent.. 9:36-42. 1981 https://doi.org/10.1016/0300-5712(81)90033-6
  3. Feilzer. A. J., De Gee. A. J. and Davidson, C. L. :Curing contraction of composites and glass ionomer cements. J. Prosthet. Dent.. 59:297-300, 1988 https://doi.org/10.1016/0022-3913(88)90176-X
  4. Brannstro m. M. : Communication between the oral cavity and the dental pulp associated with restorative treatment. Oper. Dent.. 9:57-68. 1984
  5. Qvist, V., Qvist, J. and Mjor. I. A : Placement and longevity of tooth-colored restorations in Denmark. Acta. Odontol. Scand., 48:305-311, 1990 https://doi.org/10.3109/00016359009033621
  6. Kim, J. H.. Park, J.-W., Park. J.-H. and Kim. S. K : Bond strength and micro leakage in resin bonding to tooth structure, J. Kor. Acad. Conserv. Dent., 24: 570-577, 1999
  7. Lutz, F., Krejci, I. and Oldenburg. T. R. : Elimination of polymerization stresses at the margins of posterior composite resin restorations: A new restorative technique. Quint. Int., 17:777-784, 1986
  8. Koenigsberg, S., Fuks, A. and Grajower. R. : The effect of three filling techniques on marginal leakage around Class II composite resin restorations in vitro, Quint. Int ., 20:117-121. 1989
  9. Dietschi, D., Siebenthal. G. D., Nevei-Rosenstand, L. and Holz, J. : Influence of the restorative technique and new adhesives on the dentin marginal seal and adaptation of resin composite Class II restorations: an in vitro evaluation, Quint. Int., 26:717-727. 1995
  10. Krejci. I., Sparr, D. and Lutz, F. : A three-sited light curing technique for conventional Class II composite resin restorations, Quint. Int., 18: 125-131. 1987
  11. Lutz. F., Krejci, I. and Barbakow. F. : Quality and durability of marginal adaptation in bonded composite restorations, Dent. Mater., 7: 107-113, 1991 https://doi.org/10.1016/0109-5641(91)90055-4
  12. Neiva. I. F., De Andrada. M. A. C., Baratieri. L. N., Monteiro, S. Jr. and Ritter A. V. : An in vitro study of the effect of restorative technique on marginal leakage in posterior composites. Oper. Dent., 23: 282-289. 1998
  13. Rada. E. R. : Class II direct composite resin restorations with beta-quartz glass-ceramic inserts. Quint. Int., 24:793-798, 1993
  14. Bertolotti. R. : Posterior composite technique utilizing directed polymerization shrinkage and a novel matrix, J. Practical Periodontics and Aesthet. Dent.. 3: 53-58. 1991
  15. Cr im . G. A. and Chapman, K. W. : Reducing microleakage in Class II restorations: An in vitro study, Quint. Int., 25:781-785, 1994
  16. Swift. E. J., Triolo, P. T. Jr., Barkmeier, W. W., Bird. J. L. and Bounds, S. J. : Effect of low-viscosity resins on the performance of dental adhesives. 9:100-104. 1996
  17. Leevailoj. C., Cochran, M. A., Matis. B. A., Moore. B. K and Platt, J. A. : Microleakage of posterior packable resin composites with and without flowable liners, Opel. Dent., 26: 302-307. 2001
  18. Moon, J.-H. and Ko. K-H. : The effect of flowable resin lining on the marginal microleakage of condensable resin restoration. J. Kor. Acad. Conserv. Dent., 26: 16-22. 2001
  19. Kemp-Scholte, C. M. and Davidson, C. L. : Complete marginal seal of Class V resin composite restorations effected by increased flexibility. J. Dent., Res., 69:1240-1243,1990 https://doi.org/10.1177/00220345900690060301
  20. Komp-Scholte, C. M. and Davidson, C. L. : Marginal integrity related to bond strength and strain capacity of composite resin restorative systems, J, Prosthet. Dent., 64:658-664, 1990 https://doi.org/10.1016/0022-3913(90)90291-J
  21. Rooklidge, E., Boyer, D. and Bouschlicher, M. : Cusp deformation by shrinkage of condensable composite, J. Dent. Res. 78 Abstracts of Papers p399 Abstract 2349, 1999
  22. Unterbrink. G. L. and Liebenberg, W. H. : Flowable resin composites as 'filled adhesives': Literature review and clinical recommendations, Quint. Int., 30:249-257. 1999
  23. Belli. S., Inokoshi, S., zer. F., Pereira, P. N. R., Ogata, M. and Tagami, J. : The effect of additional enamel etching and a flowable composite to the interfacial integrity of class II adhesive composite restorations, Oper. Dent., 26:70-75. 2001
  24. Tung, F. F., Estafan, D. and Scherer. W. : Microleakage of a condensable resin composite: An in vitro investigation, Quint. Int., 31 :430-434, 2000
  25. Chuang, S. F., Liu. J. K. and Jin. Y. T. : Microleakage and internal voids in Class II composite restorations with flowable composite linings, Oper, Dent., 26: 193-200. 2001
  26. Beznos. C. : Microleakage at the Cervical Margin of Composite Class II Cavities with Different Restorative Techniques, Oper. Dent., 26:60-69. 2001
  27. Van Meerbeek, B., Willems. G., Celis. J. P., Roos. J. R., Braem. M., Lambrechts, P. and Vanherle. G. : Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area, J. Dent. Res., 72:1434-1442, 1993 https://doi.org/10.1177/00220345930720101401
  28. Davidson, C. L., De Gee, A. J. and Feilzer. A. : The competition between the composite-dentin bond strength and the polymerization contraction stress. J. Dent. Res., 63:1396-1399,1984 https://doi.org/10.1177/00220345840630121101
  29. Jang, B. S. and Kim. S. K. : Bonding of resin inlay to glass-ionomer base with various treatments in inlay surface, J. Kor. Acad. Conserv. Dent., 25: 399-406. 2000
  30. Carvalho, R. M., Pereira, J. C., Yoshiyama, M. and Pashley. D. H. : A review of polymerization contraction: The influence of stress development versus stress relief. Oper. Dent., 21: 17-24, 1996
  31. Feilzer. A. J., De Gee, A. J. and Davidson, C. L. : Setting stress in composite resin in relation to configuration of restoration, J. Dent. Res., 66:1636-1639, 1987 https://doi.org/10.1177/00220345870660110601
  32. Kinomoto, Y. and Torii. M. : Photoelastic analysis of polymerization contraction stress in resin composite restoration. J. Dent., 26:165-171. 1998 https://doi.org/10.1016/S0300-5712(96)00083-8
  33. Bayne, S. C., Thompson, J. Y.. Swift, Jr. E. D., Stamatiades. P. and Wilkerson. M. : A characterization of first-generation flowable composites, J. Dent. Ass., 129:567-577. 1998 https://doi.org/10.14219/jada.archive.1998.0274
  34. Leinfelder. K. F. and Prasad. A. : A new condensable composite for the restoration of posterior teeth, Dent. Today. 17:112-116, 1998
  35. The Dental Advisor: Packable composites, The Dental Advisor. 16:1-4. 1999
  36. Labella, R., Lambrechts, P., Van Meerbeek. B. and Vanherle, G. : Polymerization shrinkage and elasticity of flowable composites and filled adhesives, Dent. Mater., 15:128-137, 1999 https://doi.org/10.1016/S0109-5641(99)00022-6
  37. Tolidis. K. and Setcos, J. C. : Initial degree of polymerization shrinkage exhibited by flowable composite resins. J. Dent. Res. 78 Abstracts of Papers p482 Abstract 3015, 1999
  38. Alomari, Q. D., Reinhardt, J. W. and Boyer, D. B. :Effect of liners on cusp deflection and gap formation in composite restorations, Oper. Dent., 26: 406-411, 2001
  39. Lutz, F., Krejci. I. and Barbakow. F. : Restoration quality in relation to wedge-mediated light channeling. Quint. Int., 23:763-767, 1992
  40. Ciamponi. A. L., Del Portillo Lujan, V. A. and Ferreira Santos, J. F. : Effectiveness of reflective wedges on the polymerization of composite resins. Quint. Int., 25:599-602, 1994
  41. Barnes, D. M.. Holston, A. M., Strassler. H. E. and Shires, P. J. : Evaluation of clinical performance of twelve posterior composite resins with a standardized placement technique, J. Esthet. Dent., 2:36-43, 1990 https://doi.org/10.1111/j.1708-8240.1990.tb00604.x
  42. Eick, J. D. and Welch, F. H. : Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity, Quint. Int., 17: 103-111. 1986
  43. Versluis, A., Tantbirojn, D. and Douglas, W. H. : Do dental composites always shrink toward the light? J. Dent. Res., 77:1435-1445, 1998 https://doi.org/10.1177/00220345980770060801
  44. Ferracane, J. L. : Current trends in dental composites, Critical Reviews of Oral Biology and Medicine, 6:302-318. 1995 https://doi.org/10.1177/10454411950060040301
  45. Pires. J. A. F., Cvitko, E., Denehy, G. E. and Swift. E. J. Jr. : Effects of curing tip distance on light intensity and composite resin microhardness, Quint. Int., 24:517-521. 1993
  46. Rueggeberg, F. A. and Jordan, D. M. : Effect of light-tip distance on polymerization of resin composite. Int. J. Prosthet., 6:364-370, 1993
  47. Dang. H. M. and Sarrett. D. C. : Wear behavior of flowable and condensable composite resins, J. Dent. Res. 78 Abstracts of Papers p447 Abstract 2736, 1999
  48. Ulusu. T., Oztas, N. and Tulunoglu, O. : Comparison of the effect of insertion techniques of a resin composite on dentinal adaptation of two visible light-cured bases: Direct evaluation versus a replica technique, Quint. Int., 27:63-68. 1996