Restorative Dentistry and Endodontics

The Korean Academy of Conservative Dentistry (대한치과보존학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Cavity Configuration on Bond Strength and Microleakage of Composite Restoration

와동의 형태에 따른 복합레진의 결합강도 및 변연누출에 관한 연구

  • Choi, Seung-Mo (Department of Conservative Dentistry, Division of Dentistry, Graduate School, Kyung Hee University) ;
  • Choi, Gi-Woon (Department of Conservative Dentistry, Division of Dentistry, Graduate School, Kyung Hee University) ;
  • Choi, Kyoung-Kyu (Department of Conservative Dentistry, Division of Dentistry, Graduate School, Kyung Hee University) ;
  • Park, Sang-Jin (Department of Conservative Dentistry, Division of Dentistry, Graduate School, Kyung Hee University)
  • 최승모 (경희대학교 대학원 치의학과 보존학전공) ;
  • 최기운 (경희대학교 대학원 치의학과 보존학전공) ;
  • 최경규 (경희대학교 대학원 치의학과 보존학전공) ;
  • 박상진 (경희대학교 대학원 치의학과 보존학전공)
  • Published : 2002.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

복합레진의 중합시 발생하는 수축과 응력은 와동의 형태에 의하여 영향을 받으며 이는 수복재는 물론 접착계면의 물성을 결정하는 요인이 된다. 본 연구는 다양한 C-factor를 갖는 와동에 상아질 접착제 Clearfil SE Bond(Kuraray)를 도포하고 혼합형 복합레진인 Clearfil AP-X(Kuraray)와 미세혼합형의 Esthet-X(Dentsply)를 충전하여 미세인장강도 및 변연누출을 측정 평가함으로써 중합수축이 수복물과 치아계면에 미치는 영향을 평가하고자 시행하였다. 98개의 Bovine 하악전치를 이용하여 표면의 상아질을 #600 SiC paper로 연마한 대조군 및 와동의 넓이를 조절하여 C-factor 2.3, 3.0, 3.7이 되도록 제작한 실험군 와동에 복합레진을 충전한 후 37의 증류수에 24시간 보관하였다. 저속 diamond saw(Buehler)를 이용하여 1mm 두께로 수직절단 후 고속 diamond point(#104 Shofu)를 이용하여 단면적 1mm$^2$가 되도록 hour-glass모양으로 형성하여 시편을 제작하였고, Universal testing machine(EZ-Test; Shimadzu, Japan)에 시편을 부착하고 cross head speed 1mm/min으로 인장력을 가하여 미세인장 결합강도를 측정하였다. 각 C-factor에 따른 변연누출실험을 위하여 복합레진이 수복된 치아를 37$^{\circ}C$의 증류수에 24시간 보관한 후 와동을 제외한 부위에 nail varnish를 도포하고 3mol/L silver nitrate용액에 24시간 암보관한 다음 수세하여 현상액에 24시간 경과시킨 후 치아의 장축에 따라 절단하여 침투된 색소의 정도를 광학현미경상에서 40배로 관찰하였다. 각각의 실험결과는 ANOVA/Tukey's test 및 Kruskal-Wallis non-parametric independent analysis와 Mann-Whitney U test에 의하여 통계 분석하여 다음과 같은 결론을 얻었다. 1. 대조군에 있어서 혼합형 복합레진의 미세인장 결합강도는 미세혼합형에 비하여 높았으며, 실험군 사이에는 유의차를 보이지 않았다. 2.모든 복합레진의 미세인장 결합강도는 와동의 C-factor증가에 따라 감소하는 경향을 나타내었고, 혼합형 복합레진의 실험군은 대조군에 비하여 낮게 나타났으며, 미세혼합형 복합레진에서는 유의차를 보이지 않았다. 3. 절단측 및 치은측 변연부의 미세누출정도는 혼합형 복합레진이 미세혼합형에 비하여 대체로 높게 나타났다. 4. 모든 실험군에서 미세누출은 C-factor증가에 따라 증가하였고 절단측에 비하여 치은측 변연이 높게 나타났으나 통계학적 유의차는 보이지 않았다. C-factor의 변화에 대하여 필러함량과 탄성계수가 높은 혼합형 복합레진이 미세혼합형에 비하여 더 민감한 결과를 보인다. 이는 복합레진 수복시 재료의 선택과 중합수축의 적절한 조절이 중요한 요소임을 시사한다.

Keywords

References

  1. Feilzer AJ, De Gee AJ, and Davidson CL : Quantitative determination of stress reduction by flow in composite restorations. Dent Mater, 6 : 167-171, 1990 https://doi.org/10.1016/0109-5641(90)90023-8
  2. Kemp-Scholte CM, and Davidson CL (a) : Complete marginal seal of class V resin composite restorations effected by increased flexibility. J Dent Res, 69 : 1240-1243, 1990 https://doi.org/10.1177/00220345900690060301
  3. Alster D, Feilzer AJ, De Gee AJ, and Davidson CL : Polymerization contraction stress in thin resin composite layers as a function of layer thickness. Dent Mater, 13 : 146-150, 1997 https://doi.org/10.1016/S0109-5641(97)80115-7
  4. avidson CL, van Zegbroeck L, Feilzer AJ : Destructive stresses in adhesive luting cements. J Dent Res, 70 : 880-882, 1991 https://doi.org/10.1177/00220345910700050301
  5. Jorgensen KD, Asmussen E, and Shimokobe H : Enamel damages caused by contracting restorative resins. Scan J Dent Res, 83 : 120-122, 1975. https://doi.org/10.1177/154405910408300207
  6. Davidson CL, De Gee AJ. and Feilzer AJ : The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res, 63 : 1396-1399, 1984 https://doi.org/10.1177/00220345840630121101
  7. Asmussen E : Composite restorative resins: composition versus wall-to-wall polymerization contraction. ACTA Odontol Scand, 33 : 337-344, 1975 https://doi.org/10.3109/00016357509004638
  8. Stansbury JW : Synthesis and evaluation of novel multifunctional oligomers for dentistry. J Dent Res, 71 : 434-437, 1992 https://doi.org/10.1177/00220345920710030201
  9. Byerley TJ, Eick JD, Chen GR, Chappelow CC, and Millich F : Synthesis and polymerization of new expanding dental monomers. Dent Mater, 8 : 345-350, 1992 https://doi.org/10.1016/0109-5641(92)90016-6
  10. Eick JD. Byerley TJ, Chappell RP, Chen GR, Bowles CQ, and Chappelow CC : Properties of expanding SOC/epoxy copolymers for dental use in dental composites. Dent Mater, 9 : 123-127, 1993 https://doi.org/10.1016/0109-5641(93)90088-8
  11. Munksgaard EC, Hansen EK, and Kato H : Wall-to-wall polymerization contraction of composite resins versus filler content. Scand J Dent Res, 95 : 526-531. 1987
  12. Hansen EK : Effect of cavity depth and application technique on marginal adaptation of resins in dentin cavities. J Dent Res, 65 : 1319-1321, 1986 https://doi.org/10.1177/00220345860650110701
  13. Kemp-Scholte CM and Davidson CL : Marginal sealing of curing contraction gaps in class V composite resin restorations. J Dent Res, 76 : 841-845, 1988
  14. Krejci I and Lutz F : Marginal adaptation of class V restorations using different restorative techniques. J Dent, 19 : 24-32, 1991 https://doi.org/10.1016/0300-5712(91)90032-T
  15. Liberman R, Ben-Amar A, Herteanu L, and Judes H : Marginal seal of composite inlays using different polymerization techniques. J Oral Rehebil, 24 : 26-29, 1997 https://doi.org/10.1046/j.1365-2842.1997.00451.x
  16. Feilzer AJ, Dooren LH, De Gee AJ, and Davidson CL : Influence of light intensity on polymerization shrinkage and integrity of restoration- cavity interface. Eur J Oral Sci, 103 : 322-326, 1995 https://doi.org/10.1111/j.1600-0722.1995.tb00033.x
  17. Davidson-Kaban SS, Davidson CL, Feilzer AJ, De Gee AJ, and Erdilek N : The effect of curing light variations of bulk curing and wall-to-wall quality of two types and various shades of resin composites. Dent Mater, 13 : 344-352, 1997 https://doi.org/10.1016/S0109-5641(97)80105-4
  18. Sakaguchi RL and Berge HX : Reduced light energy density decreased post-gel contraction while maintaining degree of conversion in composites. J Dent, 26 : 695-700, 1998 https://doi.org/10.1016/S0300-5712(97)00048-1
  19. Kemp-Scholte CM and Davidson CL (b) : Marginal integrity related to bond strength and strain capacity of composite resin restorative systems. J Prosthet Dent, 64 : 658-664, 1990 https://doi.org/10.1016/0022-3913(90)90291-J
  20. van Meerbeek B, Willems G, Celis JP, Roos JR, Braem M, Lambrechts P, and Vanherle G : Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res, 72 : 1434-1442, 1993 https://doi.org/10.1177/00220345930720101401
  21. Choi KK, Condon JR, and Ferracane JL : The effects of adhesive thickness on polymerization contraction stress of composites. J Dent Res, 79 : 812-817, 2000 https://doi.org/10.1177/00220345000790030501
  22. Feilzer AJ, De Gee AJ, and Davidson CL : Setting stress in composite resin in relation to configuration of the restoration. J Dent Res, 66 : 1636-1639, 1987 https://doi.org/10.1177/00220345870660110601
  23. Feilzer AJ. De Gee AJ. and Davidson CL : Setting stresses in composites for two different curing modes. Dent Mater, 9 : 2-5, 1993 https://doi.org/10.1016/0109-5641(93)90095-8
  24. deGee AJ. Feilzer AJ. and Davidson CL : The linear polymerization shrinkage of unfilled resins and composite determined with a linometer. Dent Mater, 9 : 11-14, 1993 https://doi.org/10.1016/0109-5641(93)90097-A
  25. Sano H, Shono T, Sonoda H, Takatsu T, Ciucchi B, Carvalho R, and Pashley DH : Relationship between surface area for adhesion and tensile bond strength - Evaluation of a micro-tensile bond test. Dent Mater, 10 : 236-240, 1994 https://doi.org/10.1016/0109-5641(94)90067-1
  26. Nakajima M, Sano H. Burrow MF. Tagami. et al : Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives, J Dent Res, 74 : 1679-1688, 1995 https://doi.org/10.1177/00220345950740100901
  27. Yoshikawa T, Sano H, Burrow MF, Takatsu T, Yoshiyama M, Ciucchi B, et al : Cavity bonding: effect of dentin depth in Dentin/pulp Complex 1995 and the International Meeting on Clinical Topics of Dentin/pulp Complex. Tokyo: Quintessence Publishing Co., Ltd.. 357-358, 1995
  28. Bouschilcher MR, Vargas MA, and Boyer DB : Effect of composite type. light intensity. configuration factor and laser polymerization on polymerization contraction forces. Am J Dent, 10 : 88-96, 1997
  29. Yoshikawa T. Sano H, Burrow MF, Tagami J. and Pashley DH : Effects of dentin depth and cavity configuration on bond strength. J Dent Res, 78 : 898-905, 1999 https://doi.org/10.1177/00220345990780041001
  30. Clinical Research Associates. Subject : Product use survey--CRA Newsletter, 19:1-4, 1995
  31. Qvist V, Qvist J, and Mjor IA : Placement and longevity of tooth-colored restorations in denmark. ACTA Odontol Scand, 48:305-311, 1990 https://doi.org/10.3109/00016359009033621
  32. Lutz F, Krejci I. and Barbakow F : Quality and durability of marginal adaptation in bonded composite restorations. Dent Mater, 7: 107-113, 1991 https://doi.org/10.1016/0109-5641(91)90055-4
  33. Davidson CL, and De Gee AJ : Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res, 63: 146-148, 1984 https://doi.org/10.1177/00220345840630021001
  34. Pashley DH, Sano H, Ciucchi B. Yoshiyama M, and Carvalho RM : Adhesion testing of dentin bonding agents: A review. Dent Mater, 11 : 117-125, 1995 https://doi.org/10.1016/0109-5641(95)80046-8
  35. Willems G, Lambrechts P, Braem M, Celis JP, Vanherle G.A : Classification of dental composites according to their morphological and mechanical characteristics. Dent Mater, 8(5) : 310-9. 1992 https://doi.org/10.1016/0109-5641(92)90106-M
  36. Miyazaki M, Hinoura K. Onose H, Moore BK : Effect of filler content of light-cured composites on bond strength to bovine dentine. J Dent, 19(5) : 301-3. 1991 https://doi.org/10.1016/0300-5712(91)90078-D
  37. Zidan O, Asmussen E, Jorgensen KD. : Correlation between tensile and bond strength of composite resins. Scand J Dent Res, 88(4) : 348-51, 1980
  38. Boyer DB, Chalkley Y, Chan KC : Correlation between strength of bonding to enamel and mechanical properties of dental composites. J Biomed Mater Res, 16(6) : 775-83, 1982 https://doi.org/10.1002/jbm.820160604
  39. Swift EJJ, Perdigao J, and Heymann HO : Bonding to enamel and dentin: A brief history and state of the art. Quint lnt. 26 : 95-110, 1995
  40. Ryu GJ, Park SJ, and Choi KK : The effect of cavity configuration on the mechanical properties of resin composites. J Kor Aca Cons Dent, (in processing)
  41. Uno S, Tanaka T. Inoue S, and Sano H : The influence of configuration factors on cavity adaptation in compomer restorations. Dent Mater J, 18 : 19-31, 1999 https://doi.org/10.4012/dmj.18.19