Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Friction and Wear Properties of Plasma-sprayed Cr2O3-MoO3 Composite Coatings at High Temperature

MoO3가 첨가된 Cr2O3 플라즈마 용사코팅의 고온 마찰 마멸 특성

  • Lyo, In-Woong (Tribology Research Center, Korea Institute of Science and Technology) ;
  • Ahn, Hyo-Sok (Tribology Research Center, Korea Institute of Science and Technology) ;
  • Lim, Dae-Soon (Department of Material Science and Engineering, Korea University)
  • 여인웅 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 안효석 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 임대순 (고려대학교 재료공학과)
  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Tribological behavior of plasma-sprayed $Cr_2O_3$-based coatings containing $MoO_3$ at 450$^{\circ}C$ was investigated to understand the influence of $MoO_3$. A reciprocal disc-on-plate type tribo-tester was employed to examine fricition and wear behavior of the specimens. The microstructure and phase composition of the coating was characterized with Transmission Electron Microscopy(TEM). The TEM analysis indicated that $MoO_3$ was dispersed into the grain boundary, resulting in the increase of the hardness and density of the coating. Worn surfaces were investigated by scanning electron microscopy and chemistry of the worn surfaces was analyzed using a X-ray Photoelectron Spectrometer(XPS). The results showed that the friction coefficient of the $MoO_3$-added coatings was lower than that without $MoO_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with $MoO_3$ composition in the protecting layer appears to be more favorable in reducing the friction.

산화몰리브덴($MoO_3$)이 첨가된 산화크롬 용사코팅층을 제조하여 산화몰리브덴의 첨가에 따른 고온(450$^{\circ}C$)에서의 플라즈마 용사코팅층에 마찰, 마멸특성을 조사하였다. 마찰, 마멸 특성에 대한 실험을 위하여 왕복동 마멸시험장치를 사용하였다. TEM을 이용하여 코팅층의 미세 구조와 각 상들의 조성을 살펴보았다. 분석 결과에 의하면 산화몰리브덴이 입계로 분산되어 있어 코팅층의 경도와 밀도의 증가가 발생하였다. 마멸시험후 마멸면의 물리적 변화와 화학적 조성의 변화를 SEM와 XPS를 통하여 살펴보았다. 산화몰리브덴이 첨가된 코팅층에서 마찰계수의 감소를 관찰할 수 있었다. 산화몰리브덴이 첨가된 코팅의 마멸된 표면에 마찰, 마멸에 유리한 보호막의 형성이 광범위하게 일어남을 알 수 있었다. 이러한 보호막에 몰리브덴이 산화몰리브덴의 형태로 존재하는 것을 XPS 분석을 통하여 알 수 있었다. 보호막에 산화몰리브덴의 존재가 마찰계수를 감소시키는 것으로 생각된다.

Keywords

References

  1. R. J. Bratton and S. K. Lau, 'Zirconia Thermal Barrier Coatings,' Advances in ceramics, 3 226-40 (1981)
  2. H-S. Ahn and O. K. Kwon., 'Wear Behavior of Plasmasprayed Partially Stabilized zirconia on a Steel Substrate,' Wear, 162-164 636-44 (1993) https://doi.org/10.1016/0043-1648(93)90556-2
  3. J. Y. Kim. D. S. Lim and H-S. Ahn, 'High Temperature Wear of Plasma-sprayed Zr$O_2-Y_2O_3$ Coatings,' J. Kor. Ceram. Soc., 30 [12] 1059-65 (1993)
  4. J. Y. Kim and D. S. Lim, 'The Effects of the Annealing Temperature and Environments on Room Temperature Wear Behavior of Plama-sprayed Partially Stabilized Zirconia Coatings,' J. Kor. Ceram. Soc., 31 [10] 1176-80 (1994)
  5. H-S. Ahn, J. Y. Kim and D. S. Lim, 'Tribological Behavior of Plasma-sprayed Zirconia Coatings,' Wear, 203-204 77-87 (1997) https://doi.org/10.1016/S0043-1648(96)07395-4
  6. W. Bryzik and R. Kamo, 'TACOM/Cummins Adiabatic Engine Program,' SAE Tech. Paper 830314 (1983)
  7. Thermal Barrier Coatings for Reciprocal Engines, Newsletter, Surface Architecture, ANAPS-Materials Publication, 2 No. 3
  8. L. M. Sheppard, 'Reliable Ceramics for Heat Engines,' Advanced Materials and Processes, 130 54-66 (1986)
  9. J. M. Cuetos, E. Fernandez, R. Vijande, A. Rincon and MC. Perez, 'Plasma-sprayed Coatings Treated with Lasers: Tribological Behavior of${Cr}_2O_3$,' Wear, 169 173-79 (1993) https://doi.org/10.1016/0043-1648(93)90295-W
  10. H-S. Ahn and S. K. Lee, 'Sliding Wear of Plasma-sprayed Chromium Oxide-silica Coating,' Proceedings of 1st World Tribology Congress, 115 (1997)
  11. H-S. Ahn, I. W. Lyo and D. S. Lim, 'Influence of Molybdenum Composition in Chromium Oxide-based Coatings on Their Tribological Behavior,' Surface and Coatings Technology, 133-134 351-36 (2000)
  12. H-S. Ahn and O. K. Kwon, 'Tribological Behaviour of Plasma-sprayed Chromium Oxide Coating,' Wear, 225-229 814-824 (1999)
  13. I. W. Lyo, H-S. Ahn and D. S. Lim, 'Friction and Wear Properties of Plasma-sprayed ${Cr}_2O_3-MoO_3$ Composite Coatings at Room Temperature,' J. Kor. Ceram. Soc., 39 [1] 79-85 (2002) https://doi.org/10.4191/KCERS.2002.39.1.079
  14. I. W. Lyo and H-S. Ahn, 'Study on The Spraying Parameters of a Plasma-sprayed Hydroxyapatite Coating,' J. Kor. Ceram. Soc., 36 [4] 444-50 (1999)
  15. A. A. Ibrahim and G. A. El-Shobaky. 'Solid-solid Interactions in The $MoO_3-Al_2O_3$ System,' Thermochim. Acta, 147 175-88 (1989) https://doi.org/10.1016/0040-6031(89)85173-1
  16. K. Komvopoulos and H. Li, 'The Effect of Tribofilm Formation and Humidity on the Friction and Wear Properties of Ceramic Materials,' J. Tribo., 114 131-40 (1992) https://doi.org/10.1115/1.2920851