Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Amount of the Sintering Additives on the Microstructural Development and the Mechanical Properties of Silicon Nitride with Aligned Whisker Seeds

  • Bae, Byoung-Chan (Department of Materials Science and Engineering , Pukyong National University) ;
  • Park, Dong-Soo (Ceramic Materials Group, Korea Institute of Machinery and Materials) ;
  • Kim, Hai-Doo (Ceramic Materials Group, Korea Institute of Machinery and Materials) ;
  • Han, Byung-Dong (Ceramic Materials Group, Korea Institute of Machinery and Materials) ;
  • Park, Chan (Department of Materials Science and Engineering , Pukyong National University) ;
  • Zou, Lin-Hua (Department of MSE, Tsinghua University)
  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Silicon nitride samples with aligned whisker seeds were prepared with different amounts of yttria and alumina as the sintering additives. Their sintering behaviors and the microstructural developments between 2123K and 2323K were examined. The sample with larger amount of the sintering additives showed faster densification and grain growth. Even though addition of the aligned whisker seeds slightly retarded densification of silicon nitride, it improved the flexural strength and the fracture toughness. Both the flexural strength and the fracture toughness of silicon nitride with the aligned whisker seeds were increased as the amount of the sintering additives was increased.

Keywords

References

  1. H. Hayashi, K. Hirao, M. Toriyama and S. Kanzaki, 'MgSiN$_2$ Addition as a Means of Increasing the Thermal Conductivity of $\beta$-Silicon Nitride,' J. Am. Ceram. Soc., 84 [12] 3060-62 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb01141.x
  2. N. Hirosaki, Y. Okamoto, M. Ando, F. Munakata and Y. Akimune, 'Thermal Conductivity of Gas-pressure-sintered Silicon Nitride,' J. Am. Ceram. Soc., 79 [11] 2878-82 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb08721.x
  3. A. de Pablos, M. I. Osendi and P. Miranzo, 'Effect of Micro-structure on the Thermal Conductivity of Hot-pressed Sili-con Nitride Materials,' J. Am. Ceram. Soc., 85 [1] 202-06 (2002)
  4. K. Watari, K. Hirao, M. Toriyama and K. Ishizaki, 'Effect of Grain Size on the Thermal Conductivity of Si$_3$N$_4$,' J. Am. Ceram. Soc., 82 [3] 777-79 (1999) https://doi.org/10.1111/j.1151-2916.1999.tb01835.x
  5. S. W. Lee, H. B. Chae, D. S. Park, Y. H. Choa, K. Niihara and B. J. Hockey, 'Thermal Conductivity of Unidirection-ally Oriented Si$_3$N$_4$w/Si$_3$N$_4$ Composites,' J. Mater. Sci., 35 [18] 4487-93 (2000) https://doi.org/10.1023/A:1004807516791
  6. D-S. Park, S-Y. Lee, H-D. Kim, B-J. Yoo and B-A. Kim, 'Extra-large Grains in the Silicon Nitride Ceramics Doped with Yttria and Hafnia,' J. Am. Ceram. Soc., 81 [7] 1876-80 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02560.x
  7. K-M. Lee, W-H. Lee, Y-H. Koh, J-J. Choi and H-E. Kim, 'Microstructural Evolution and Mechanical Properties of Gas-pressure-sintered Si$_3$N$_4$ with Yb$_2$O$_3$ as a Sintering Aid,' J. Mater. Res., 14 [5] 1904-09 (1999) https://doi.org/10.1557/JMR.1999.0255
  8. D-S. Park and C-W. Kim, 'A Modification of Tape Casting for Aligning the Whiskers,' J. Mater. Sci., 34 5827-32 (1999) https://doi.org/10.1023/A:1004770520830
  9. M. Mitomo, N. Yang, Y. Kishi and Y. Bando, 'Influence of Powder Characteristics on Gas Pressure Sintering of Si$_3$N$_4$,' J. Mater. Sci., 23 3413-19 (1988) https://doi.org/10.1007/BF00551328
  10. A. G. Evans and E. A. Charles, 'Fracture Toughness Deter-minations by Indentation,' J. Am. Ceram. Soc., 59 [7-8] 371-72 (1976) https://doi.org/10.1111/j.1151-2916.1976.tb10991.x
  11. D-S. Park, T-W. Roh, B. J. Hockey, Y. Takigawa, B-D. Han, H-D. Kim and Y. Yasutomi, 'Two Cores in One Grain in the Microstructure of Silicon Nitride Prepared with Aligned Whisker Seeds,' J. Euro. Ceram. Soc., in press