DOI QR코드

DOI QR Code

Finite strip method in probabilistic fatigue analysis of steel bridges

  • Li, W.C. (Department of Civil & Environmental Engineering, Carleton University) ;
  • Cheung, M.S. (Department of Civil & Environmental Engineering, Carleton University)
  • 투고 : 2002.01.28
  • 심사 : 2002.11.06
  • 발행 : 2002.12.25

초록

A finite strip method is developed for fatigue reliability analysis of steel highway bridges. Flat shell strips are employed to model concrete slab and steel girders, while a connection strip is formed using penalty function method to take into account eccentricity of girder top flange. At each sampling point with given slab thickness and modulus ratio, a finite strip analysis of the bridge under fatigue truck is performed to calculate stress ranges at fatigue-prone detail, and fatigue failure probability is evaluated following the AASHTO approach or the LEFM approach. After the failure probability is integrated over all sampling points, fatigue reliability of the bridge is determined.

키워드

참고문헌

  1. AASHTO(1994), AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D. C.
  2. Ayyub, B.M. and Mccuen, R.H.(1995), "Simulation-based reliability method", Probabilistic Structural Mechanics Handbook, Sundararajan, C. editor, Chapter 4, Chapman & Hall Ltd., New York, NY.
  3. Cheung, M.S., Li, W. and Chidiac, S.E.(1996), Finite Strip Analysis of Bridges, E & FN SPON, London.
  4. Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division, (1982), "Fatigue reliability 1 to 4", J. Structural Engineering, ASCE, 108(1), 3-88.
  5. Fisher, J.W.(1984), Fatigue and Fracture in Steel Bridges, Case Studies, John Wiley & Sons, New York, NY.
  6. NY.Harris, D.O. (1995), "Probabilistic fracture mechanics", Probabilistic Structural Mechanics Handbook, Sundararajan, C. editor, Chapter 6, Chapman & Hall Ltd., New York, NY.
  7. Laman, J.A. and Nowak, A.S.(1996), "Fatigue-load models for girder bridges", J. Structural Engineering, ASCE, 122(7), 726-733. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:7(726)
  8. Moses F, Schilling, C.G. and Raju, K.S.(1987), Fatigue Evaluation Procedures for Steel Bridges. NCHRP Report 299, Washington, D.C.
  9. Murakami, Y.(1987), Stress Intensity Factors Handbook, Pergamon, Oxford, UK.
  10. Zhao, Z., Haldar, A. and Breen, F.L.(1994), "Fatigue-reliability evaluation of steel bridges", J. Structural Engineering, ASCE, 120(5), 1608-1623. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1608)
  11. Wirsching, P.H.(1995), "Probabilistic fatigueanalysis", Probabilistic Structural Mechanics Handbook, Sundararajan, C. editor, Chapter 7, Chapman & Hall Ltd., New York, NY.