DOI QR코드

DOI QR Code

A Study on the Improvement of Shape Optimization associated with the Modification of a Finite Element

유한요소의 개선에 따른 형상최적화 향상에 관한 연구

  • Published : 2002.07.01

Abstract

In this paper, we investigate the effect and the importance of the accuracy of finite element analysis in the shape optimization based on the finite element method and improve the existing finite element which has inaccuracy in some cases. And then, the shape optimization is performed by using the improved finite element. One of the main stream to improve finite element is the prevention of locking phenomenon. In case of bending dominant problems, finite element solutions cannot be reliable because of shear locking phenomenon. In the process of shape optimization, the mesh distortion is large due to the change of the structure outline. So, we have to raise the accuracy of finite element analysis for the large mesh distortion. We cannot guarantee the accurate result unless the finite element itself is accurate or the finite elements are remeshed. So, we approach to more accurate shape optimization to diminish these inaccuracies by improving the existing finite element. The shape optimization using the modified finite element is applied to a two and three dimensional simple beam. Results show that the modified finite element has improved the optimization results.

Keywords

References

  1. Zienkiewicz, O. C. and Campbell, J. S., 1973, Shape Optimization and Sequential Linear Programing, John Wiley & Sons. New York
  2. Haftka, R. T. and Grandhi, R. V., 1986, 'Structure Shape Optimization-A Survey,' Computer Methods in Applied Mechanics and Engineering, Vol. 57, pp. 91-106 https://doi.org/10.1016/0045-7825(86)90072-1
  3. Ding, Y., 1986, 'Shape Optimization of Structures : A Literature Survey,' Computers & Structures, Vol. 24, pp. 985-1004 https://doi.org/10.1016/0045-7949(86)90307-X
  4. Kim, N. H., Choi, K. K., and Chen, J. S., 2000, 'Mesh less Shape Design Sensitivity Analysis and Optimization for Contact Problem with Friction,' Computational Mechanics, Vol. 25, pp. 157-168 https://doi.org/10.1007/s004660050466
  5. Yao, T. M., and Choi, K. K., 1989, '3-D Shape Optimum Design and Automatic Finite Element Regridding,' International Journal for Numerical Methods in Engineering, Vol. 25, pp. 157-168
  6. Yerry, M. A., and Shephard, M. S., 1984, ' Automatic Three-Dimensional Mesh Generation by the Modified octree Technique,' International Journal for Numerical Methods in Engineering, Vol. 20, pp. 1965-1990 https://doi.org/10.1002/nme.1620201103
  7. Belegundu, A. D. and Rajan, S. D., 1988, ' A Shape Optimization Approach Based on Natural Design Variables and Shape Functions,' Computer Methods in Applied Mechanics and Engineering, Vol. 66, pp. 87-106 https://doi.org/10.1016/0045-7825(88)90061-8
  8. Zhnag, S. and Belegundu, A. D., 1992, ' A Systematic Approach for Generating Velocity Fields In Shape Optimization,' Structure Optimization, Vol. 5, pp. 84-94 https://doi.org/10.1007/BF01744700
  9. Koh, B. C, and Kikuchi, N., 1987, ' New Improved Hourglass Control for Bilinear and Trilinear Elements In Anisotropic Linear Elasticity,' Computer Methods in Applied Mechanics and Engineering, Vol. 65, pp. 1-46 https://doi.org/10.1016/0045-7825(87)90181-2

Cited by

  1. Study on characteristics of hydro-mechanical transmission in full power shift vol.10, pp.7, 2018, https://doi.org/10.1177/1687814018790668