Preparation of Hydrophilic Coating Film Using GPS(Glycidoxypropyl Trimethoxysilane)

GPS(Glycidoxypropyl Trimethoxysilane)을 이용한 친수성 코팅 필름의 제조

  • Park, Jung Kook (Department of Environmental System Engineering, Korea University) ;
  • Song, Ki Chang (Department of Chemical Engineering, Konyang University) ;
  • Kang, Hyun Uk (Department of Chemical Engineering, Korea University) ;
  • Kim, Sung Hyun (Department of Chemical Engineering, Korea University)
  • 박정국 (고려대학교 환경시스템공학과) ;
  • 송기창 (건양대학교 화학공학과) ;
  • 강현욱 (고려대학교 화학공학과) ;
  • 김성현 (고려대학교 화학공학과)
  • Received : 2002.04.29
  • Accepted : 2002.10.16
  • Published : 2002.12.01

Abstract

In order to improve the anti-fogging property of polymer films, organic-inorganic hybrid coating solutions which have good hydrophilic property and transmission in the range of visible light were synthesized by the sol-gel method. The coating solutions were prepared by adding glycidoxypropyl trimethoxysilane(GPS) to a colloidal silica(15 nm) suspension(Ludox). GPS as silane coupling agent forms strong bonds to the colloidal silica and surrounding polymer matrix and links two different materials together. Solutions prepared by addition of GPS at the acidic condition resulted in coatings that were less prone to cracking, while those at the basic condition caused coatings with more cracking. These resulted in better hydrophilic property and transmission in the range of visible light for the solution prepared at the acidic condition(pH 2). Compared with coatings under acidic conditions, coatings prepared at basic conditions showed worse hydrophilic property and transmission in the range of visible light.

고분자 필름의 무적성을 향상시키기 위하여 우수한 친수성 및 높은 가시광선 투과율을 보이는 유기-무기 혼성 코팅용액을 졸-겔법으로 합성하였다. 코팅용액은 입자 직경이 15 nm 크기의 무기물인 콜로이드 실리카 용액(Ludox)에 유기 조성을 함유한 화합물인 GPS을 첨가하여 제조되었다. 실란 커플링제인 GPS는 콜로이드 실리카와 주변의 매트릭스(matrix)인 고분자 필름에 각각 강한 결합을 형성하여 두 개의 서로 다른 물질을 강하게 연결하는 결합제 역할을 한다. 강산성 조건 하에서 제조된 혼성 코팅용액으로 고분자 필름 위에 코팅한 경우는 코팅필름의 표면이 거의 균열이 없는 매끈한 미세구조를 보이는 반면, 약산과 염기성 조건 하에서 제조된 혼성 코팅용액으로 코팅한 경우에는 균열이 심한 미세구조를 보였다. 또한 pH 2의 산성 조건에서 제조한 필름은 우수한 친수성 및 높은 가시광선 투과율을 보인 반면, 염기성 조건으로 제조한 코팅필름은 친수성이 좋지 않았으며, 낮은 가시광선 투과율을 보였다.

Keywords

Acknowledgement

Supported by : 한국과학재단(KOSEF)

References

  1. Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing Brinker, J. C;Scherer, G. W
  2. Polymer Sci. and Tech v.8 Park, D. K
  3. Journal of Non-Crystalline Solids v.100 no.1-3 Brinker, J. C https://doi.org/10.1016/0022-3093(88)90005-1
  4. Journal of Non-Crystalline Solids v.48 no.1 Sol-gel transition in simple silicates Brinker, J. C;Keefer, K. D;Ashley, C. S https://doi.org/10.1016/0022-3093(82)90245-9
  5. Journal of Non-Crystalline Solids v.63 no.1-2 Briniker, J. C;Keefer, K. D;Ashley, C. S https://doi.org/10.1016/0022-3093(84)90385-5
  6. MS. Dissertation Cha, J. K
  7. Journal of Sol-Gel Science and Technology v.1 no.3 Schmidt, H https://doi.org/10.1007/BF00486165
  8. Polymer Sci. and Tech v.8 Park, J. O
  9. Journal of Applied Polymer Science v.40 no.78 Noell, W. J. L;Wikes, L. G;Mohanty, K. D;Mcgrath, K. D https://doi.org/10.1002/app.1990.070400709
  10. New J. Chem v.18 Kasemann, R;Schmidt, H
  11. Molecular Characterization of Composite Interfaces Pohl, R. E;Osterholtz, D. F
  12. Langmuir v.7 no.8 Morrow, A. B;McFalan, S. J https://doi.org/10.1021/la00056a022